Re: Reamer for tuner bushings
You could use a tapered reamer if you reamed the hole from both sides so that the top edge of the hole on both sides was the exact bush diameter. However,that might leave the hole very slightly 'waisted' in the centre portion,that could easily be sanded away using a piece of rolled up sandpaper. Personally,i'd go for the ''purpose made'' bushing reamer & even that needs to be used VERY carefully as they're usually darned sharp. Lean one way or another,& you can still cut an oversized hole,
Ivan
Weber F-5 'Fern'.
Lebeda F-5 "Special".
Stelling Bellflower BANJO
Tokai - 'Tele-alike'.
Ellis DeLuxe "A" style.
Bookmarks