Results 1 to 15 of 15

Thread: Best capo for Trinity College TM-375 bouzouki?

  1. #1

    Default Best capo for Trinity College TM-375 bouzouki?

    It's always exciting to have a new challenge and this long scale is definitely challenging. I've found some general talk about capos and bouzoukis but no opinions about which ones people prefer. This chunky neck style stretches my Kyser guitar capos, and I'm hoping some experienced players can direct me to the best one for this particular make and model.

    Also, strings. I know this is, to a certain extent, a matter of personal preferance, but if somebody knows of the best strings for this particular model, your advice would be gratefully accepted.

    Any other general suggestions for somebody new would be most appreciated.

  2. #2
    Isolated enthusiast Caleb's Avatar
    Join Date
    Nov 2006
    Location
    DFW, America
    Posts
    3,125

    Default Re: Best capo for Trinity College TM-375 bouzouki?

    Have you tried one of these? http://www.paigecapo.com/

    Love them on my guitar. Replaced my Kyser and never looked back. Would probably work well on a zouk too.
    "If we could read the secret history of our enemies, we should find in each man's life sorrow and suffering enough to disarm all hostility." -Longfellow

  3. #3
    coprolite mandroid's Avatar
    Join Date
    Oct 2002
    Location
    Outer Spiral Arm, of Galaxy, NW Oregon.
    Posts
    15,654

    Default Re: Best capo for Trinity College TM-375 bouzouki?

    My picking buddy has one of the elastic ones, made for banjos.. to use on his TC 'zouk.. they dont cost much .
    writing about music
    is like dancing,
    about architecture

  4. #4

    Default Re: Best capo for Trinity College TM-375 bouzouki?

    Thank you both for your advice. Anybody else who cares to chime in, don't be shy.

    Any and all advice to a beginner is welcome.

  5. #5
    '`'`'`'`'`'`'`'`'`'`' Jacob's Avatar
    Join Date
    Sep 2002
    Posts
    945

    Default Re: Best capo for Trinity College TM-375 bouzouki?

    This Paige banjo capo, designed to fit above the 5th fret on a 5-string, works really well on my Petersen and Fylde CBOMs. I haven't played a Trinity College bouzouki, so I don't know if it might fit one. Elderly gives its dimensions.

  6. #6
    Registered User
    Join Date
    Dec 2002
    Location
    Nashville, TN
    Posts
    1,614

    Default Re: Best capo for Trinity College TM-375 bouzouki?

    Most any banjo capo should do ok. I use and like a shubb banjo capo on my mandola, OM, and tenor guitar. The Paige style is convenient though for leaving wrapped around the neck just above the nut when not in use.
    I have found that the wraparound metal frame of the Paige or Victor capos can sometimes scrape the sides of the neck when using up in higher positions.

  7. #7

    Default Re: Best capo for Trinity College TM-375 bouzouki?

    I finally have something to add instead of just asking newbie questions. I found a Kyser quick change capo that works very well. Model KBMB is designed for banjos, mandolins and bouzoukis. It can handle necks up to 1.75 inches thick. I really like the quick change capos because they are so easy to use. I've noticed used bouzoukis sometimes have neck scars from capos which I assume are of the screw on design. The Kyser style eliminates that issue. So if in the future, somebody searches this board for the same information, here is an answer to this thread's particular question in addition to the other great suggestions.

  8. #8
    Registered User otterly2k's Avatar
    Join Date
    Sep 2003
    Location
    Philadelphia
    Posts
    3,607

    Default Re: Best capo for Trinity College TM-375 bouzouki?

    I've been a happy user of Shubb capos for decades. Shubb makes a banjo capo that works perfectly for zouks and OM's. The only downside is that you need a pocket to put it in when it's not in use. I have never had a problem with that, but some people prefer the kind that clamp onto your headstock in between uses.
    Karen Escovitz
    ~~~~~~~~~~~~~~
    Otter OM #1
    Brian Dean OM #32
    Old Wave Mandola #372
    Phoenix Neoclassical #256
    ~~~~~~~~~~~~~~~~~~~
    If you're gonna walk on thin ice, you might as well dance!

  9. #9
    Registered User jmp's Avatar
    Join Date
    Oct 2012
    Location
    San Francisco, CA
    Posts
    335

    Default Re: Best capo for Trinity College TM-375 bouzouki?

    I've had the results so far from the Kyser Banjo/Mando Capo on a TM-325. It is for a flat fingerboard, the perfect size, easy to put on and take off and reposition, does not cause damage to the instrument, etc.

  10. #10
    Registered User
    Join Date
    Feb 2003
    Location
    Massachusetts
    Posts
    1,934

    Default Re: Best capo for Trinity College TM-375 bouzouki?

    The Kyser banjo/mando capo is a very good overall choice for the Trinity zouk. I often use my favorite guitar capo, the Planet Waves NS as well, but the jaws don't open quite far enough to get abouve the 5th fret if you want to do that (and I sometimes do).

    You asked about strings as well. Elderly Instruments in Michigan makes up custom GHS Irish bouzouki sets in medium gauge and light. They are for octave tuning which I have kept on my Trinity. A lot of people might consider them too light, but I've used them for years and like them fine. I don't really want my zouk to sound like a guitar...I like the thinner sound and lighter texture you hear on a lot of the old 70s era Irish records when the instrument was just coming into it's own. Elderly is really easy to do business with and very reliable.
    Steve

  11. The following members say thank you to Steve L for this post:

    vegas 

  12. #11
    Registered User
    Join Date
    Apr 2006
    Location
    USA
    Posts
    172

    Default Re: Best capo for Trinity College TM-375 bouzouki?

    I've had very good luck with the Planet Waves NS capo for mandolin/banjo. It has adjustable tension, which is crucial for paired strings--easier to keep intonation sorted.

    Click image for larger version. 

Name:	DV016_Jpg_Large_585087.jpg 
Views:	143 
Size:	36.8 KB 
ID:	100602
    Custom Weber Bridger (East Indian rosewood/ Sitka)
    MK Legacy O

  13. #12
    Registered User zoukboy's Avatar
    Join Date
    Dec 2003
    Location
    Lubbock, TX
    Posts
    1,199

    Default Re: Best capo for Trinity College TM-375 bouzouki?

    I've tried them all and hands-down, I'd recommend the Planet Waves Dual Action capo. It's adjustable, like a Paige or a Shubb, but has a trigger mechanism, too, which allows it to be moved while playing. Essential in my book.

    Edit: just realized it's been improved and renamed the "TriAction Capo":



    Click image for larger version. 

Name:	pw_prod_pw-cp-09_main_2.jpg 
Views:	100 
Size:	22.0 KB 
ID:	100605
    Roger Landes
    http://rogerlandes.com
    The Hal Leonard Irish Bouzouki Method:
    http://www.halleonard.com/product/vi...?itemid=696348
    "House to House" with Randal Bays
    http://www.cdbaby.com/cd/bayslandes
    "The Janissary Stomp" with Chipper Thompson
    http://www.cdbaby.com/cd/rogerchipper

  14. #13

  15. #14
    Registered User HaveMercy's Avatar
    Join Date
    Dec 2008
    Location
    Flagstaff, AZ
    Posts
    21

    Default Re: Best capo for Trinity College TM-375 bouzouki?

    I have a P. Abnett zook and my Shubb banjo capo works fine, except for the fact that you can't clamp it to the headstock when you're not using it. It goes in a pocket or on a nearby flat surface.

    The Planet Waves is cool, but it's weight tends to unbalance my zook unlike on my guitar.

    My standard Paige banjo capo is perfect up to the 4th fret, where it becomes too narrow. So, I've ordered the Paige wide banjo capo, since I love the way these "park" behind the nut when not in use.

    I will now officially have 1 million capos of varying size and shape lying about.
    Cheers, Ken
    To be less wrong than yesterday

  16. #15

    Default Re: Best capo for Trinity College TM-375 bouzouki?

    Well then - 2019 already!
    Resurrecting my late 1980's TC Bouzouki (which has followed me around faithfully thru the years) for another try now that I am on the cusp of retirement and there are classes on the interweb. Going with a reload of the stock octave string setup to start, and just went through the capo finding ordeal.
    The Kyser 6 maple acoustic worked, but was too tight and put a small dent in the neck behind the 5th fret .
    The Shubb C5 Banjo (flat) is way too small - just wide enough, but not nearly deep enough to fit over the neck
    The Shubb C1K (Darth Vader Black) works great. EZ to fret 7 and beyond. As it is steel I may give it a smoosh in a vise to flatten the slight radius, but it seems to work fine as is.

    Right behind you Do'nal - don't slow down! ;-)
    Cheers!
    Donatlga

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •