Results 1 to 2 of 2

Thread: Gibson F5 Fern joint

  1. #1
    Registered User Benjamin T's Avatar
    Join Date
    May 2010
    Location
    Michigan
    Posts
    166

    Default Gibson F5 Fern joint

    Do we know exactly when the compound dovetail joint entered into production on the F5 Ferns produced under Mr. Derrington?
    From what I can tell through research, is sometime in 1999. Do we know the month or date?
    Can one tell if an instrument has and M and T joint versus the compound dovetail by serial number, luthiers mirror, magnet, etc?

  2. #2
    Registered User
    Join Date
    Sep 2003
    Location
    Nashville
    Posts
    4,927

    Default Re: Gibson F5 Fern joint

    The only way is to look inside the instrument. You can remove the end pin, then shine a light in the F hole and you should be able to see the headblock. If there is a bolt in there, it is M&T. If not, likely a dovetail.
    Have a Great Day!
    Joe Vest

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •