Finally ponied up for one last month and I can't believed I waited so long. It combined with a McClung is a game changer for tone.
After using one for a year on my Northfield, I finally took it off last week. I realized, with my lanky frame, and the way I hold the mandolin, the tone guard isn't actually doing anything but poking me in my side. A week before removing the tone guard, I added an arm rest and that has been really comfortable. In my case, the best thing about the tone guard was that it added weight to the body and prevented the nose dive when I didn't hold the neck.
If you naturally keep the mandolin back away from your body, the ToneGard will make no difference.
But there is another confounding factor I hadn't considered - the construction of your mandolin. How much does your mandolin's natural sound involve vibration of the back. If not at all, then it doesn't matter if you snuff out the back vibration and the ToneGard in this case will make no difference.
For some mandolins the difference may be less apparent to the player than to the audience. It has been explained to me that sometimes the difference the back of the instrument makes to the sound is more apparent in front of the instrument.
This is why I test it by playing into a corner of the room. To hear what the audience hears.
Life is short, play hard. Life is really really short, play really really hard.
The entire staff
funny....
Tonegards seem to be a wonderful solution to overcome a limitation some players have with carved back instruments. They apparently allow instruments to act as if they have opened up much quicker than is usually seen and thus project more sound.
Bowlback players have played for centuries without the need for one, and they hold their instruments in their laps. So odd.
Not all the clams are at the beach
Arrow Jazzbo
Arrow G
Clark 2 point
Gibson F5L
Ratliff CountryBoy A
00-21 (voiced by Eldon Stutzman)
Two items. One is I am not sure that the back of a bowl participates in the sound generation in the same way as a carved back. So my thinking is that even if something like a tonegard were rigged up for a bowlback, it is just not needed and would provide no benefit.
Second item. I play bowlback without hugging it to my body, and have learned to play my carved back instruments and flat backed instruments without contact as well, either playing sitting or standing. But i think there is a context that does make a difference. I don't ever see a bowlback in a jam session. Not ruling it out of course, but for years i was the only one I ever knew. I think in classical and more exact musics maintaining a proper hold on the mandolin is way up there in priority. The extent to which I have played in a mandolin orchestra and in a more chamber music setting, and in a recording session, holding the mandolin properly, away from the body, was always "part of the deal". Being hyper aware of everything seems to be how I managed it. But in the more relaxed setting setting of a folk jam, with less exactness required, and adult beverages often enough, and with fatigue from the lack of discipline required to stop and go home when tired, eventually the mandolin is against my body, and being my carved back instrument, at such times that tonegard makes a metric ton of of difference.![]()
Life is short, play hard. Life is really really short, play really really hard.
The entire staff
funny....
2000 Brentrup Model 23 #6, Peter Coombe #248, Gibson A Jr., Strad-O-Lin, Eastman MDO-305
http://ericplatt.weebly.com/
https://www.facebook.com/LauluAika/
https://www.lauluaika.com/
https://www.facebook.com/Longtine-Am...14404553312723
I just met with my erstwhile mando/fiddle player. Returning his mikes & stands, as I'm moving 2 hours away (thus "erstwhile.") I picked up his mando (which he says is nothing special) and played it a bit, and then held it away from my body and played a bit and man did the tone change. His eyes lit up. I mentioned the tone guard and he said he'd never heard of it. I bet he'll be looking into one. It really made that particular instrument come alive.
Tone Gards used to have black rubber around the prongs. I believe the black rubber made marks on varnished instruments. The TG now comes with a translucent rubber tubing on the prongs and shouldn't leave any marks. HOWEVER, if you make a habit of taking the gard off and putting it back on, the tubing can work its way down, thus exposing the tip of the prongs, which can scratch your instrument. I'm wondering if a drop of super glue to close of the end of the tubing would prevent that from happening.
Just be real careful of the little rubber tubes that protect the metal from gouging the sides of your mandolin. Years ago, one of the tubes wore out and I didn't realize it. One day I took it off to find the metal of the tone guard had poked through the tube, and left a bad dent. I vowed to never let this happen again.
After that, I checked the condition of the tubes on my Nugget's guard regularly. I thought I was on top of things. One day I pulled the guard off and it left a scratch as I pulled it off. A tiny rupture had developed in the tube after my last inspection!
I think they add tone to an instrument, but I just don't use them anymore because of these experiences.
I leave my ToneGards on all the time. They haven't been removed for years and years and in one case has not been taken off since I first put it on. I just consider it a part of the instrument.
There was some concern about the material of those little black or white "tubes" being in constant contact with the finish of the instrument. But again, if it is always there it never comes off.
Life is short, play hard. Life is really really short, play really really hard.
The entire staff
funny....
I leave my ToneGards on all the time. They haven't been removed for years and years and in one case has not been taken off since I first put it on. I just consider it a part of the instrument. Like worrying about how the bottom of the strap button interact may have affected the finish of the wood aside the hole drilled. I dunno.
There was some concern about the material of those little black or white "tubes" being in constant contact with the finish of the instrument. But again, if it is always there it never comes off.
Life is short, play hard. Life is really really short, play really really hard.
The entire staff
funny....
Lots of responses. My personal experience has been helpful on some mandolins and not so much on others.
Stiver A style custom #388-5-20
Mid-Missouri EM8 solid body (Mike Dulak's final EM8 build)
Kentucky KM-950
Weber Gallatin A Mandola "D hole"
Ibanez Bowl Back
Rogue 100A (current campfire tool & emergency canoe paddle)
The Tone Guard website says to contact them for prices. I emailed them weeks ago and haven't heard back. Wonder why.
Gibson A-Junior snakehead (Keep on pluckin'!)
$89 at Elderly
https://www.elderly.com/products/ton...ional-mandolin
Just got a sunrise from Banjo Ben Clark $79 I think.
"Mean Old Timer, He's got grey hair, Mean Old Timer he just don't care
Got no compassion, thinks its a sin
All he does is sit around an play the Mandolin"
Does anyone use a tone gard with a mandolin with a varnish finish? I know if it never comes off then you won't see any marks, but the webpage doesn't recommend for a french polished instrument.
Bookmarks