Re: Machine tuning - bushings don't fit
There are individual mini tuners used mostly for guitars, just make sure you get the right orientation. They are usually sold in sets of 6, 3 on each side so you might have to buy two sets to get 8 or or you could use the method pops1 describes. Get the measurements with a digital caliper if possible. The other thing you can do since it's not going to be original anyway is to plug the holes and have them re-drilled to fit a standard set of tuners. Before you do any of that get the spacing measurements so we can at least see if there is a better option.
"It's comparable to playing a cheese slicer."
--M. Stillion
"Bargain instruments are no bargains if you can't play them"
--J. Garber
Bookmarks