Results 1 to 5 of 5

Thread: Morris A4 Has A Surprising Flaw

  1. #1

    Default Morris A4 Has A Surprising Flaw

    I love my new Morris mandolin but I just took the strings off to give it a good cleaning and oil the fretboard. The removable bridge obviously comes up but underneath it, I was surprised to find that the bridge was set in place on the mandolin before the finish was even dry. It actually looks like it's going straight to wood in some areas without finish it all. A bit surprising/odd considering how nice it otherwise is.

    Click image for larger version. 

Name:	20200605_160525.jpg 
Views:	80 
Size:	369.2 KB 
ID:	186367

    Click image for larger version. 

Name:	20200605_160128.jpg 
Views:	73 
Size:	447.2 KB 
ID:	186368

    Click image for larger version. 

Name:	20200605_160013.jpg 
Views:	70 
Size:	349.9 KB 
ID:	186369
    Morris A4
    Morgan Monroe MMS-5W

  2. #2
    Mandolin & Mandola maker
    Join Date
    Sep 2002
    Location
    Bega NSW, Australia
    Posts
    1,212

    Default Re: Morris A4 Has A Surprising Flaw

    The bridge was not put into place before the finish was properly dry. I don't know what Morris uses, but that sort of thing is normal for some finishes, especially if the finish is shellac based. No amount of drying will get around it. It will happen with the passage of time. It doesn't happen to the thick bullet proof polyester finishes of the Asian imports, but those finishes kill the sound.
    Peter Coombe - mandolins, mandolas and guitars
    http://www.petercoombe.com

  3. #3

    Default Re: Morris A4 Has A Surprising Flaw

    Agreed, pretty much any high-quality mandolin without a poly finish will show an impression like this. Definitely not a flaw, but you might see it as a con. The only time it would be a problem is if the bridge were installed in the wrong place, as has happened with many vintage mandolins which also show this kind of impression, just in the wrong place.

  4. #4
    Lurkist dhergert's Avatar
    Join Date
    Jul 2012
    Location
    Blue Zone, California
    Posts
    1,380
    Blog Entries
    1

    Default Re: Morris A4 Has A Surprising Flaw

    Also looks like some of the finish might have adhered to the bottom of the bridge and come up with the bridge. Check the bottom of the G&D bridge foot, is there finish there?

    That doesn't mean the finish wasn't dried. Some finishes just cure very slowly -- like years -- and some never fully cure.
    -- Don

    "The less I play it, the better it sounds!" -Zippy the Pinhead
    "It is a lot more fun to make music than it is to argue about it."
    -DH

    2002 Gibson F-9
    2016 MK LFSTB
    1975 Suzuki taterbug (plus an assortment of other noisemakers)
    [About how I tune my mandolins]
    [7/29/2019 -- New Arrival!!!]

  5. #5

    Default Re: Morris A4 Has A Surprising Flaw

    There's no finish on the bottom of the bridge. Honestly though, it doesn't bother me at all because I don't plan on selling it. It fits me and my playing style not to mention it's beautiful to look at, play and listen to. It also has great sound projection. I just put my braided leather strap on it and it looks really nice on it.

    Thanks for the feedback!

    Click image for larger version. 

Name:	Morris A4.jpg 
Views:	55 
Size:	1.47 MB 
ID:	186381
    Morris A4
    Morgan Monroe MMS-5W

  6. The following members say thank you to ryevick for this post:


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •