Re: Slot tuners Stiffness Problem
A thick piece of the plastic that most products are sold in will cut with a scissors, bend to fit the curve, and shim the post. It will last a long time too. I have plastic behind bushing for a mandolin that had smaller bushings with a tuner change. The originals always turned hard, but in another mandolin the don't. Shimming the blushing worked great. In this case it would be better to shim all, or most of the way around. You can find the plastic in various thickness.
If you are lucky the little old time thin bushings for guitar may fit the hole and you could push them in and recenter you post. These are thin and since your holes are larger than your post these may work.
THE WORLD IS A BETTER PLACE JUST FOR YOUR SMILE!
Bookmarks