A guy wants me to build him an f model. and I have a real weird problem I have the fingerboard finished to frets. I have 4 frets on , going slow but good,then I realize the fret wire looks bigger then what I use so , I check, it is wrong, and I don't have enough to finish, so I ease the first out, perfect. start to ease the second one up , and it was almost like a sheet pulling up as if the wood were laminated . I know you can get chips. but I am aware, I am very careful and work slow.with that , I , but when I say chips out it was 1/8 wide and from one fret to the next. I worry about chip out, but hardly get it any more. Again , this is the last 3 fret of the mando but with glasses and goggles the wood up there.had the look of luan This FB is going to make a great soup spoon. So, what I wondered has anyone been having wood problems, I have never herd of ebony doing this, this mando does not want to get done,and though I keep starting over, its the best looking .components, that I have done, , but geesh, Really , a rant. i'm done
Bookmarks