Results 1 to 3 of 3

Thread: ISO: Case that Fits a 1930's Regal Resonator

  1. #1
    Registered User Mandobart's Avatar
    Join Date
    Apr 2009
    Location
    Washington State
    Posts
    2,974

    Default ISO: Case that Fits a 1930's Regal Resonator

    I realize there are several sources for building or repairing cases. What I'm asking about here is experience finding an existing or currently manufactured case to fit one of these old instruments. I'm currently out of town and don't have the instrument with me to measure it.

    I know there are a few other owners of these on the café - any of you have a case for yours or knowledge of what fits? Thanks!

  2. #2
    Registered User
    Join Date
    Sep 2007
    Location
    NC
    Posts
    3,734

    Default Re: ISO: Case that Fits a 1930's Regal Resonator

    Don’t know for sure, but what about a National RM-1 case? PM me the measurements (because I tend to be poor at following threads once they fall off the frequently happening page), and I’d be happy to check mine for you...
    Chuck

  3. #3
    Registered User
    Join Date
    Jan 2009
    Location
    S.W. Wisconsin
    Posts
    5,216

    Default Re: ISO: Case that Fits a 1930's Regal Resonator

    Don't know it this will work, but if you get the measurements from CES it's a good price.

    https://reverb.com/item/29401267-nat...pre-owned-2019
    THE WORLD IS A BETTER PLACE JUST FOR YOUR SMILE!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •