Re: Preparing for a Tru-Oil Finish
Originally Posted by
sunburst
....learned that the first few coats of TO should be rubbed out smooth and left to cure. Later coats, I do the "rub it on, rub it off" method where one applies the thin coat of TO then rubs it all off with a clean, soft, lint-free rag (old T-shirt). Repeat until satisfied with the results...
I could not agree more -- it makes the whole finishing so much quicker and better!
Bernie
____
Due to current budgetary restrictions the light at the end of the tunnel has been turned off -- sorry about the inconvenience.
Bookmarks