Results 1 to 12 of 12

Thread: Nitrocellulose reactions with tuning machines

  1. #1
    Registered User j. condino's Avatar
    Join Date
    Nov 2005
    Location
    Asheville, NC
    Posts
    2,758

    Default Nitrocellulose reactions with tuning machines

    No mandolin content here, but very applicable to this forum and the collective knowledge of some of the folks here.

    I pulled these circa 1940 Epiphone tuning machines off a (rather large) instrument today. There is a very distinct red color reaction around the tuning machines and string posts only where the layer of nitrocellulose finish has been removed slightly to allow for a good fit, exposing some unfinished maple. This is NOT surface level, but appears to be in or under the finish. The original finish was blonde, so it is not leftover color from fading. Could it be a deeper reaction with the sanding sealer? It is similar on both machines. I believe I am the first person to work on this instrument and remove the machines, "gold" plated 30s /40s era Klusons, hand engraved from the factory. I've never seen it before and am curious if anyone here knows.

    The neck was broken in a couple of places, so it is getting prepped for a new European maple neck and a scroll graft. For the curious, the high quality seasoned European maple bass neck blank with decent figure and excellent grain costs approx. $450 just for the blank!

    It would be great if we could keep the discussion on point with people who actually have nitro & finishing experience.....
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	DSCN8404.jpg 
Views:	232 
Size:	613.0 KB 
ID:	181000  
    www.condino.com

    Crafted by hand in a workshop powered by the sun.

  2. #2

    Default Re: Nitrocellulose reactions with tuning machines

    Looks like the reddish color is only where the open areas are........oil/lubricant reaction? No experience with this, just an observation, FWIW.

  3. The following members say thank you to Jeff Mando for this post:


  4. #3
    Registered User j. condino's Avatar
    Join Date
    Nov 2005
    Location
    Asheville, NC
    Posts
    2,758

    Default Re: Nitrocellulose reactions with tuning machines

    I wondered about that; possibly, but here is no sign of lubrication-very dry nitro. Whatever it is, the quality is strong enough that you could do a nice 'burst
    www.condino.com

    Crafted by hand in a workshop powered by the sun.

  5. #4
    Registered User sunburst's Avatar
    Join Date
    Nov 2003
    Location
    Kentucky
    Posts
    15,863

    Default Re: Nitrocellulose reactions with tuning machines

    I don't know...
    but it looks like something from the metal of the tuner has infiltrated the wood under the finish. I base that on the color looking to be in the wood under the finish, and it looks like it followed the grain from the places where wood was removed to relieve the tuner gears and 'clamps' and those parts were in contact with unfinished wood. I don't think it has much to do with the lacquer, but instead is in the wood under the lacquer.

    Notes:
    It is not evident at the screw holes.
    It is not evident at the post holes.
    Those are also places where unfinished end grain contacts metal; why is there a difference?

    What material are the gears? The screws? The posts?

  6. The following members say thank you to sunburst for this post:


  7. #5
    Registered User
    Join Date
    Jan 2009
    Location
    North Carolina
    Posts
    184

    Default Re: Nitrocellulose reactions with tuning machines

    What do the contact surfaces of the tuners look like?

  8. #6
    Moderator MikeEdgerton's Avatar
    Join Date
    Mar 2007
    Location
    Howell, NJ
    Posts
    26,874

    Default Re: Nitrocellulose reactions with tuning machines

    Quote Originally Posted by Jonathan Ward View Post
    What do the contact surfaces of the tuners look like?
    Look at the bottom of the image.
    "It's comparable to playing a cheese slicer."
    --M. Stillion

    "Bargain instruments are no bargains if you can't play them"
    --J. Garber

  9. #7
    Registered User
    Join Date
    Jan 2009
    Location
    S.W. Wisconsin
    Posts
    7,507

    Default Re: Nitrocellulose reactions with tuning machines

    Could there have been something on the gear/assembly that was a lube from the factory. Would have been long since dry but may have stained decades ago.
    THE WORLD IS A BETTER PLACE JUST FOR YOUR SMILE!

  10. #8
    Front Porch & Sweet Tea NursingDaBlues's Avatar
    Join Date
    Mar 2015
    Location
    My heart is in The South.
    Posts
    522

    Default Re: Nitrocellulose reactions with tuning machines

    Only a guess. But it looks very similar to residue from jewelers rouge. I've encountered a couple of folks that used jewelers rouge to clean and polish corroding metal parts on their instruments including tuning machines.

  11. #9
    Registered User
    Join Date
    Jan 2009
    Location
    North Carolina
    Posts
    184

    Default Re: Nitrocellulose reactions with tuning machines

    Quote Originally Posted by MikeEdgerton View Post
    Look at the bottom of the image.
    Thanks! Couldn't enlarge the image on the device I was using.

  12. #10
    formerly Philphool Phil Goodson's Avatar
    Join Date
    May 2006
    Location
    Statesville, NC
    Posts
    3,256

    Default Re: Nitrocellulose reactions with tuning machines

    Is it similar on the other side, near the D & G string pegs?
    If so, I'm betting oil (heaven only knows what kind, back in the day) seeped through after a generous lube of the worms.
    Phil

    “Sharps/Flats” “Accidentals”

  13. #11

    Default Re: Nitrocellulose reactions with tuning machines

    Quote Originally Posted by Philphool View Post
    Is it similar on the other side, near the D & G string pegs?
    If so, I'm betting oil (heaven only knows what kind, back in the day) seeped through after a generous lube of the worms.
    Haha, first thing I thought... Marvel Mystery Oil!

  14. The following members say thank you to Marty Jacobson for this post:


  15. #12
    Registered User
    Join Date
    Sep 2002
    Location
    Grass Valley California
    Posts
    3,727

    Default Re: Nitrocellulose reactions with tuning machines

    Does the other side look similar? It looks like the red coloration is not down in the relieved areas.

    The color and placement cause me to wonder about faded stain in the finish. This reminds me of a book I read from the Taunton Press (Fine Woodworking) by George Frank, "Adventures in Wood Finishing". He described an event where his company had finished a batch of oak desks for a bank, and the bank didn't like the red orange color. So he and his crew sealed off the huge room and fumigated with ammonia for a few hours. I don't think he said anything about what else was affected by the fumigation but the bank was very happy with their new golden amber desks.

    Another thought is some strong color used similar to chalk fitting to bed the lumps and bumps on the "inside" of the tuner plates. The fact that the color appears at the points where lubrication would be applied is another point of interest.

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •