Re: Tuner Replacement
Two things you need to know. You need to know the spacing center to center of the posts and it they are worm over or worm under. If t's that old they are most likely worm under but the spacing is probably not the modern spacing. You're going to need that measurement. Don't worry about the value of the instrument as there are very few old bowlbacks that carry a high value and they will be labeled. I don't think it's quite that old.
The Grover tuners you're asking about have a measurement of .906 inch or 23.01 mm center post to center post and are worm over. Stewmac makes a restoration tuner that fits early Gibson models that are .931 inch or 23.60 mm. Those are pretty much your choices unless you go for a used older set. It's always an easier task if the old tuners can be resurrected.
"It's comparable to playing a cheese slicer."
--M. Stillion
"Bargain instruments are no bargains if you can't play them"
--J. Garber
Bookmarks