Results 1 to 7 of 7

Thread: DIY Speed Neck? Advice Needed

  1. #1
    Registered User
    Join Date
    Jan 2011
    Location
    Northeast U.S.
    Posts
    68

    Default DIY Speed Neck? Advice Needed

    Hello!

    As a sweaty handed feller, the gloss on my Weber Coyote gets a bit sticky at times. Looking for some advice about a speed neck process. Is it just a sand down (gently) with super fine (or wet) sandpaper and a linseed oil finish?

    Thinking I might take it to a professional, but I'm genuinely curious about the process and how difficult it is. Thank you!

  2. #2
    Moderator MikeEdgerton's Avatar
    Join Date
    Mar 2007
    Location
    40.191N -74.2W
    Posts
    22,606

    Default Re: DIY Speed Neck? Advice Needed

    While you're waiting for an answer thumb through these threads. A whole lot of people have done their own over the years.
    "Bargain instruments are no bargains if you can't play them". These are the words of J. Garber.

  3. #3
    Registered User Doug Brock's Avatar
    Join Date
    Mar 2010
    Location
    KC MO
    Posts
    347

    Default Re: DIY Speed Neck? Advice Needed

    I recently did a speed neck on my MD315. I taped off areas I didn't want to affect, then used sandpaper to work down to the maple. I tried True Oil on the bare wood but decided I preferred the feel of the bare wood and sanded back down again. The neck feels fabulous now!

    If I had a nicer mandolin with good flame on the neck but the neck was sticky, I would probably just sand down a little bit to remove the gloss, but not go all the way to bare wood. (When I started sanding on the MD315, some 600 grit sandpaper did make the neck feel better, but since I had a relatively cheap mandolin to experiment on, I decided to go all in! )

    Click image for larger version. 

Name:	Eastman MD315 p5 back.jpg 
Views:	19 
Size:	1.04 MB 
ID:	178751
    Doug Brock
    Silverangel Econo A #446, Eastman MD315, MD505
    Pisgah Wonder, Martin HD28, Martin D18GE, CA Guitars Bluegrass Performer

  4. #4
    Registered User spufman's Avatar
    Join Date
    May 2010
    Location
    Central CT
    Posts
    407

    Default Re: DIY Speed Neck? Advice Needed

    I'd start slow and just sand down the gloss to see how that feels. No guarantee that the full speed neck will work better for you when you sweat. And you'd likely lose some stability, though perhaps not on a little mandolin neck. I'm really a bass player and in the summer months I tend to play out with a glossy-necked instrument instead of my normally-favored oiled neckers.
    Blow on, man.

  5. #5
    Registered User John Bertotti's Avatar
    Join Date
    Oct 2002
    Location
    SD
    Posts
    2,817

    Default Re: DIY Speed Neck? Advice Needed

    Cut the fingers out of a latex glove liner then put a bit of talc on it every time you play.
    My avatar is of my OldWave Oval A

    Creativity is just doing something wierd and finding out others like it.

  6. #6
    Registered User Mandobart's Avatar
    Join Date
    Apr 2009
    Location
    Washington State
    Posts
    2,915

    Default Re: DIY Speed Neck? Advice Needed

    0000 steel wool works good to remove the gloss without taking off a lot of stain or any wood. On a thick finish both steel wool and fine sandpaper plug up pretty quick.

    I speed-necked all my keeper guitars and mandos. Natural oils from skin will still gloss them up so every couple years I have to steel wool them again.

  7. #7

    Default Re: DIY Speed Neck? Advice Needed

    I strip down to bare wood then apply a coat of shellac to seal the pores then rub it out with 0000 steel wool.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •