Can anyone tell me the recommended string gauges for a mid teens Gibson F4
Thanks in advance, Dave H
Can anyone tell me the recommended string gauges for a mid teens Gibson F4
Thanks in advance, Dave H
Eastman 615 mandola
2011 Weber Bitteroot A5
2012 Weber Bitteroot F5
Eastman MD 915V
Gibson F9
2016 Capek ' Bob ' standard scale tenor banjo
Ibanez Artist 5 string
2001 Paul Shippey oval hole
The D'Addario J-74 (EXP-74) gauges work fine, as do many similar sets: 0.011" (E), 0.015" (A), 0.026" (D), 0.040" (G).
You can also use something like 0.010" for E, or 0.0016" for A, or 0.041" for G, as you prefer. Anything in that ballpark should be fine. If you are afraid of the tensions in these gauges, you can certainly opt for a lighter gauge set, but that should not be necessary.
Thanks sblock, this what suspected.
Dave H
Eastman 615 mandola
2011 Weber Bitteroot A5
2012 Weber Bitteroot F5
Eastman MD 915V
Gibson F9
2016 Capek ' Bob ' standard scale tenor banjo
Ibanez Artist 5 string
2001 Paul Shippey oval hole
I have a 1916 Gibson Oval hole F-4 and I use the EXP-74s. It sounds great.
David Hopkins
2001 Gibson F-5L mandolin
Breedlove Legacy FF mandolin; Breedlove Quartz FF mandolin
Gibson F-4 mandolin (1916); Blevins f-style Octave mandolin, 2018
McCormick Oval Sound Hole "Reinhardt" Mandolin
McCormick Solid Body F-Style Electric Mandolin; Slingerland Songster Guitar (c. 1939)
The older I get, the less tolerant I am of political correctness, incompetence and stupidity.
Related question: Does the lack of a truss rod in low-end vintage Gibsons (such as my '23 A-Jr) make lighter strings preferable to reduce tension on the neck? Or are their solid necks strong enough that you don't need to worry about it? Or would lighter strings actually be worse (say, because the neck is designed for standard-weight strings and you'd need to adjust the action for lighter ones, which you can't because there's no truss rod)?
I use J74s on my ‘14 Gibson A without any problem. Their necks are shorter and beefier.
I suspect that strings back in the teens and twenties were heavier anyway and people didn’t agonise over gauges.
If you are looking for a more classical sound from your F-4, try the D'Addario EFW-74 flat wound, stainless steel set. I've been using them on my '16 F-4 for a couple of years as an alternative to PB strings (sound too much like my F-5 style mando) or the expense of Tomastik Infeld strings. They are quite soft under the fingers and sound about 90% like the TI's at 1/3 the price. ymmv
Len B.
Clearwater, FL
I use 10- 38 bronze wound on my pre- TR 1922 A..,
the A4 same year, introduced the TR, that one gets 11 - 40..
GHS or D'Add ?, I cannot tell the difference..
use whichever/whatever you can find..
they get changed often enough, right ? try them all..
writing about music
is like dancing,
about architecture
Bookmarks