-
laminating binding
i have not built in a long time, and was able to get whatever (wbw), I want from stew-mac, then " hazmat" comes into play. so, in the way of ABS plastic, will acetone bind plastic as well? thanks, you guys are life savers
Mike Marrs
-
-
Registered User
Re: laminating binding
It worked for me on the StewMac dreadnought kit I made a few months ago!
I made a rudimentary laminating jig by cutting a kerf in some 1" thick maple and lining the slot with wax paper. Then I just brushed on acetone about 6" at a time and fed it slowly through.
I then attached it to the guitar using the Weld-On adhesive from LMI (https://www.lmii.com/glue/2947-bindi...ent-15-oz.html). NFI in either company cited -- I just buy what I hear works.
Edit: You might be talking about adhering ABS to wood -- I'm not positive. I know that acetone binds it to itself, because I made a W/B strip with the above procedure. I've used the vinyl cement I linked to for ABS to wood, and celluloid to wood.
-
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks