Results 1 to 22 of 22

Thread: Capo for Octave/Bouzouki

  1. #1
    Registered User
    Join Date
    Nov 2017
    Location
    Hampshire, UK
    Posts
    37

    Default Capo for Octave/Bouzouki

    I know this is a very similar title to a thread down the list but that one ended up being more about strings, so I thought I'd start another to ask this question.

    I've just bought a Hathway short scale Bouzouki (tuned GDAE) and would like to use a capo for some of the songs I want to play.

    What are people's recommendations for a good capo?

    For ease, I'd prefer a quickdraw type but I'm open to suggestions.

  2. #2
    but that's just me Bertram Henze's Avatar
    Join Date
    Jun 2005
    Location
    0.8 mpc from NGC224, upstairs
    Posts
    10,054

    Default Re: Capo for Octave/Bouzouki

    Shubb. Unless you need to shift it while playing.
    the world is better off without bad ideas, good ideas are better off without the world

  3. The following members say thank you to Bertram Henze for this post:


  4. #3
    Registered User Oliver R's Avatar
    Join Date
    May 2008
    Location
    Cumbria
    Posts
    489

    Default Re: Capo for Octave/Bouzouki

    yep, Shubb and I like the Khyser as well

  5. The Following 2 Users Say Thank You to Oliver R For This Useful Post:


  6. #4
    Registered User John Kelly's Avatar
    Join Date
    Oct 2009
    Location
    Ardnadam, Argyll, Scotland
    Posts
    2,280

    Default Re: Capo for Octave/Bouzouki

    Shubb for me. Allows tension to be adjusted so that the capo does not pull the strings out of pitch when you tighten it. Some of the other designs can exert too much pressure on the strings and sharpen the notes when fitted.
    I'm playing all the right notes, but not necessarily in the right order. - Eric Morecambe

    http://www.youtube.com/user/TheOldBores

  7. The following members say thank you to John Kelly for this post:


  8. #5
    Mandolin Botherer Shelagh Moore's Avatar
    Join Date
    Dec 2008
    Location
    Leicestershire, UK
    Posts
    1,378

    Default Re: Capo for Octave/Bouzouki

    Shubb or Paige here.

  9. The following members say thank you to Shelagh Moore for this post:


  10. #6
    Registered User
    Join Date
    Nov 2017
    Location
    Hampshire, UK
    Posts
    37

    Default Re: Capo for Octave/Bouzouki

    That seems pretty unanimous. Thanks for the feedback.

    I've ordered the Shubb C5 banjo/mando from Eagle. We'll see if it works.

  11. #7
    Mangler of Tunes OneChordTrick's Avatar
    Join Date
    Apr 2017
    Location
    Oxfordshire, England
    Posts
    656

    Default Re: Capo for Octave/Bouzouki

    Late to the party but another vote for the Shubb

  12. #8
    Registered User John Flynn's Avatar
    Join Date
    Oct 2002
    Location
    Richmond, VA
    Posts
    8,076

    Default Re: Capo for Octave/Bouzouki

    I have multiple Shubbs and Kysers, a Paige and several others for both OM and guitar. For just practicing or jamming, they all work fine. However, for performance, I much prefer the Kyser and the Dunlop Trigger designs because they can be placed one handed and can be "stored" out of the way on the headstock. BTW, I "snubnose" mine for the OM. I figure out what width they need to be at the highest fret I plan on playing, use a hacksaw to cut them to that width and then smooth the cut end with a file.

  13. #9
    Registered User zoukboy's Avatar
    Join Date
    Dec 2003
    Location
    Lubbock, TX
    Posts
    1,251

    Default Re: Capo for Octave/Bouzouki


  14. #10
    Registered User
    Join Date
    Nov 2017
    Location
    Hampshire, UK
    Posts
    37

    Default Re: Capo for Octave/Bouzouki

    Quote Originally Posted by zoukboy View Post
    Nice. Definitely on the list if I find the stubborn doesn't work for me.

  15. #11

    Default Re: Capo for Octave/Bouzouki

    I took a Planet Waves NS guitar capo once and cut it off to the width I wanted with a hacksaw. Then I filed it over a bit and used a sharpie to darken the end up. They are made with some alloy so are real easy to cut. I also have a Shubb banjo capo, but prefer the Planet waves. The Shubb left marks on the back of the neck due to a newer varnish finish, whereas the Planet Waves did not. Now that my GBOM is several years old, I don't think it matters. Either capo comes on and off quickly, so that isn't a big deal to me.

    Svea

  16. The following members say thank you to Svea for this post:


  17. #12
    Registered User Jim Yates's Avatar
    Join Date
    May 2005
    Location
    Port Hope, Ontario, Canada
    Posts
    467

    Default Re: Capo for Octave/Bouzouki

    If you play sets of tunes in different keys and like to change capo positions mid-set, then the Quick Draw works great. With a bit of practice, you can change capo positions without losing a beat. I tune GDAD, so I need a capo.
    I have seen a fellow use an old Russell elastic capo this same way. Can you still buy those?
    Unlike John Flynn, I can't use the Keysers or the Triggers or any other spring loaded capo. They press the strings right down to the fingerboard and pull my instruments out of tune. . . and I really dislike the looks of capos and tuners and cigarettes stuck on the headstock of any instrument and picks wound between the strings. I always clip my string ends too. I like a nice neat headstock.
    Jim Yates

  18. #13
    Registered User
    Join Date
    Mar 2014
    Location
    Southampton UK
    Posts
    198

    Default Re: Capo for Octave/Bouzouki

    Quote Originally Posted by Shan Andy View Post
    That seems pretty unanimous. Thanks for the feedback.

    I've ordered the Shubb C5 banjo/mando from Eagle. We'll see if it works.
    Woops , you may find the banjo capo a little too short for bouzouk. I have used a g7th cut capo (5 string version) very successfully. It’s designed to cover 5 strings of a guitar, but of course works extremely well on bouzouki. There is an equivalent shub version, just in case the banjo version doesn’t fit.

    At the moment, on my Eastman octave, I use a very basic and cheap Freshman trigger capo (Kyser copy) and it works very well, and of course is movable very quickly. In fact I’ve seen the virtuoso bouzouki player Neil Davey use two kyser style capos on his Sobell, thus making capo changes absolutely instant.

    Are you anywhere near Southampton? I’m in Christchurch, so only 30 minutes away if you fancy meeting up for a jam

    Robbie

  19. #14
    Registered User
    Join Date
    Nov 2017
    Location
    Hampshire, UK
    Posts
    37

    Default Re: Capo for Octave/Bouzouki

    Quote Originally Posted by ukrobbiej View Post
    Woops , you may find the banjo capo a little too short for bouzouk.
    It doesn't seem to have caused any issues so far. It may be that the Hathway has a relatively narrow neck.

    Quote Originally Posted by ukrobbiej
    Are you anywhere near Southampton? I’m in Christchurch, so only 30 minutes away if you fancy meeting up for a jam
    I'm in Winchester, so not that much further up the road. If you're happy to spend time with a complete novice asking daft questions, then I'm up for a jam.

    Is there a messaging facility here?

  20. #15

    Default Re: Capo for Octave/Bouzouki

    Quote Originally Posted by Shan Andy View Post
    I know this is a very similar title to a thread down the list but that one ended up being more about strings, so I thought I'd start another to ask this question.

    I've just bought a Hathway short scale Bouzouki (tuned GDAE) and would like to use a capo for some of the songs I want to play.

    What are people's recommendations for a good capo?

    For ease, I'd prefer a quickdraw type but I'm open to suggestions.
    I have an Eastman MDO305 octave mandolin, which has a 12" radius fretboard and is 1-3/8" wide at the nut. The D'Addario Planet Waves NS Drop Tune Capo is a perfect fit for my OM.
    Click image for larger version. 

Name:	Planet Waves NS Drop Tune Capo on Eastman MDO305.jpg 
Views:	363 
Size:	478.7 KB 
ID:	183967

  21. #16

    Default Re: Capo for Octave/Bouzouki

    I like the Thalia. They tend to have a lot of sales and B stock so not as expensive as they look at first glance.
    +You can match the radius of the instrument with inserts so they work for multiple instruments.
    +Holds tune well
    +Pretty easy to move.
    +Look good.

    -Kind of heavy .
    -No real great place to put them when not in use.
    Girouard Concert A5
    Girouard Custom A4
    Nordwall Cittern
    Barbi Mandola
    Crump OM-1s Octave
    www.singletonstreet.com

  22. #17

    Default Re: Capo for Octave/Bouzouki

    I've got a kyser Banjo capo that I use on my Bouzuki, it works great. If you need to shift keys quickly between tunes an Elastic capo works great (also super cheap) you're going to want to get one of the double wrap ones though, the single wrap style doesn't create quite enough pressure to get the notes ringing out clearly on a double course instrument.

  23. #18
    Registered User bradeinhorn's Avatar
    Join Date
    Nov 2005
    Location
    Croton-on-Hudson, NY
    Posts
    2,226

    Default Re: Capo for Octave/Bouzouki

    I recently got a custom Kat Eyz capo for my bayard that is working great. Perfect amount of pressure, no retuning required, and he built it to go behind a fairly dramatic neck volute. High recommendation - http://www.kateyzcapos.com/
    Last edited by bradeinhorn; Mar-05-2020 at 8:43am. Reason: left out info
    www.bigdrawbluegrass.com

    Voight A-5
    Bayard GBOM

  24. #19
    Registered User Bunnyf's Avatar
    Join Date
    Oct 2015
    Location
    Florida
    Posts
    206

    Default Re: Capo for Octave/Bouzouki

    Ditto on Kat Eyz yoke style capo. Custom made, reasonable price. I had one made for my ‘36 Kalamazoo tenor guitar and it works well.

  25. #20
    Registered User
    Join Date
    Oct 2015
    Location
    Howell, NJ
    Posts
    332

    Default Re: Capo for Octave/Bouzouki

    Another vote for the quick draw. It parks behind the nut and can be slid into place very quickly.
    Bob Schmidt

  26. #21
    Registered User
    Join Date
    Nov 2019
    Location
    Southern Oregon Coast
    Posts
    86

    Default Re: Capo for Octave/Bouzouki

    Quote Originally Posted by Rod M. View Post
    I have an Eastman MDO305 octave mandolin, which has a 12" radius fretboard and is 1-3/8" wide at the nut. The D'Addario Planet Waves NS Drop Tune Capo is a perfect fit for my OM.
    Click image for larger version. 

Name:	Planet Waves NS Drop Tune Capo on Eastman MDO305.jpg 
Views:	363 
Size:	478.7 KB 
ID:	183967
    Thanks for this recommendation! I got one for my Mendel OM with 1 11/32" nut width and it also fits perfectly. I love the low profile and the ability to dial in the tension.
    NK Forster '23 Big Celtic - O
    Northfield F5S
    Weber Bitterroot F20-F Octave
    Home built F5 (1995)

  27. #22
    Registered User BadExampleMan's Avatar
    Join Date
    Nov 2018
    Location
    Jaffa
    Posts
    82

    Default Re: Capo for Octave/Bouzouki

    Bumping this thread - I have finally gotten my hands on my new octave mando after delays due to the pandemic and a minor outbreak of war. It's a Carvalho, 1-1/2" at the nut and unradiused. From what I can see, the Shubb C5 might be just a smidge too narrow for me. Would a C1 do the job, do you think? And what about the Paige, I think I kind of prefer that center-pressure design but that's just aesthetic, not speaking from any experience.

    What would y'all recommend?

    Thanks.

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •