Page 2 of 2 FirstFirst 12
Results 26 to 33 of 33

Thread: Ellis F5 vs. Gibson F5 vs. Collings MF5

  1. #26
    Registered User CollingsFever101's Avatar
    Join Date
    Apr 2009
    Location
    Texas
    Posts
    15

    Default Re: Ellis F5 vs. Gibson F5 vs. Collings MF5

    Thank you all for your thoughts and comments!

    Tobin, JeffD, JFDilmando, & AMM: The ToneGard did not make a noticeable difference whatsoever in our experiment as far as the mandolin's tonal qualities were concerned. We didn't worry about the ToneGard staying on because, as Flatrock pointed out, it only prevents the lessening of volume/body to the tone and does NOT amplify the volume/body in any way. For my part, when I played the three mandolins I made certain to keep them away from my body so as to hear their truest qualities as much as possible and to stay in keeping with what the TGard was doing for the Collings.

    KTB and Jeff D: The thinner frets did not produce a "weak" tone in the slightest; the Gibson had a power and a voice that was all its own. However, the thin frets did cause the notes to sound more "lean" in strength rather than "beefy" or "robust" in strength like the other two. In my opinion, those were the differences my ears were noticing. I know a recording would have helped explain this better than mere words, but we did not have access to recording equipment at the time.

    Tobin: Regarding the range response of the Ellis, there was NO doubt in any of our minds that the Ellis had absolutely killer bass; it unmistakably "boomed" beyond the other two. Don't forget that the Ellis had not been played up to that point as much or as long as the Gibson or Collings. The Ellis may yet produce comparable mid-range and treble because Hallmark and I put it through its paces to wake it up which it definitely began doing during our experiment. Perhaps you are not familiar with a bass-heavy Ellis because you have not had anything to compare it to. Thank you for your Ellis-owner thoughts and personal experience. It is very helpful regarding our topic here.

  2. #27
    Registered User Atlanta Mando Mike's Avatar
    Join Date
    Dec 2002
    Location
    Atlanta, Georgia
    Posts
    730

    Default Re: Ellis F5 vs. Gibson F5 vs. Collings MF5

    All I'm saying is that by leaving on the tonegard you added an element that can change the mandolin's tonal output compared to mandolins that don't have one on. It doesn't mean it did but it can and that creates questions when we are looking to differentiate what are often very minute tonal and volume differences.

  3. The following members say thank you to Atlanta Mando Mike for this post:


  4. #28
    Registered User Hallmark498's Avatar
    Join Date
    Sep 2004
    Location
    texas
    Posts
    372

    Default Re: Ellis F5 vs. Gibson F5 vs. Collings MF5

    I believe the ellis was the loudest even without the toneguard. I would like very much to take and play it for a month and then do another test.

    The (my) gibson had the lowest action of the mandolins, I think most everyone was in awe of how low.

  5. #29
    Middle-Aged Old-Timer Tobin's Avatar
    Join Date
    Mar 2009
    Location
    Kerrville, TX
    Posts
    4,004

    Default Re: Ellis F5 vs. Gibson F5 vs. Collings MF5

    Quote Originally Posted by CollingsFever101 View Post
    Tobin: Regarding the range response of the Ellis, there was NO doubt in any of our minds that the Ellis had absolutely killer bass; it unmistakably "boomed" beyond the other two. Don't forget that the Ellis had not been played up to that point as much or as long as the Gibson or Collings. The Ellis may yet produce comparable mid-range and treble because Hallmark and I put it through its paces to wake it up which it definitely began doing during our experiment. Perhaps you are not familiar with a bass-heavy Ellis because you have not had anything to compare it to. Thank you for your Ellis-owner thoughts and personal experience. It is very helpful regarding our topic here.
    In case I hadn't said it before: I wasn't doubting what you experienced. It just surprised me a bit, as I hadn't ever really thought of Ellis mandolins as being so bassy. If nothing else, you've piqued my interest on that count, and I'll be paying attention to it more. You may be right about my exposure, since I don't play with anyone who plays a Collings or Gibson. Nor do I ever get to hear my Ellis from anywhere but right on top of it. Anyway, I appreciate your comparisons. It's good food for thought, especially with regards to different responses as the instruments get played in over time and mature in their sound, or just 'wake up' after playing for a while.

  6. #30
    Registered User Hallmark498's Avatar
    Join Date
    Sep 2004
    Location
    texas
    Posts
    372

    Default Re: Ellis F5 vs. Gibson F5 vs. Collings MF5

    I have played several Ellis mandolins and every time I would walk away thinking, my mandolin lacked in the bass department.

  7. #31
    Registered User
    Join Date
    Dec 2003
    Location
    PA
    Posts
    372

    Default Re: Ellis F5 vs. Gibson F5 vs. Collings MF5

    Quote Originally Posted by FLATROCK HILL View Post
    I think calling what I had done to my Florida a 'mutilation' is a little bit extreme. I just had a few millimeters of 'Florskin' removed.
    - hilarious.

    I can't stress enough that my feelings about going for the black tongue are strictly a matter of taste and I do not think anyone desiring one should be denied that privilege. To each his (or her) own!
    2006 Duff F5
    2006 Gibson Original Jumbo Historic Collection
    80 year old fiddle of undetermined ancestry

  8. The following members say thank you to KevinM for this post:


  9. #32
    Registered User
    Join Date
    Aug 2013
    Location
    Va
    Posts
    2,405

    Default Re: Ellis F5 vs. Gibson F5 vs. Collings MF5

    I never have considered the size of frets affecting sound in any way. I don't like big frets because it feels like I'm between the rails of railroad tracks when I move up the fingerboard.

  10. #33
    Loarcutus of MandoBorg DataNick's Avatar
    Join Date
    Aug 2012
    Location
    Fallbrook, CA
    Posts
    3,837

    Default Re: Ellis F5 vs. Gibson F5 vs. Collings MF5

    Quote Originally Posted by Mandoplumb View Post
    I never have considered the size of frets affecting sound in any way. I don't like big frets because it feels like I'm between the rails of railroad tracks when I move up the fingerboard.
    Fret size and composition do affect tonal quality in varying degrees...
    1994 Gibson F5L made by Bruce Weber's team


    "Mandolin brands are a guide, not gospel! I don't drink koolaid and that Emperor is naked!"
    "If you wanna get soul Baby, you gots to get the scroll..."
    "I would rather play music anyday for the beggar, the thief, and the fool!"
    "Perfection is not attainable; but if we chase perfection we can catch excellence" Vince Lombardi
    Playing Style: RockMonRoll Desperado Bluegrass Desperado YT Channel

  11. The following members say thank you to DataNick for this post:


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •