Re: LR Baggs Radius is too hot - alternatives?
The Radius is not particularly high output. There are two 'level' controls on the Para DI: the small input 'gain' trim between the FX loop and input jacks, and the master 'Vol' knob on the top right. Normally, you should not have (or need) the gain trim at either extreme, and in most cases, the 'vol' is likely to be in the 11-1 o'clock region. If you are using settings much outside this, it suggests the gain staging further down the line (on the desk) is wrong.
The Radius is (in my experience) quite microphonic, however, and much more susceptible to bumps, thuds, pick noise and general 'mechanical' sensitivity than I like to see. If you have a 'sensitive' mandolin with a top that responds easily to the sound vibrations in the air (from the monitors, say), then this will also add to the problem. This is why electric guitars are solid!
We have discussed the causes of feedback numerous times. Basic physics and acoustics.
Some questions.
How loud do you play? With drums? Electric instruments?
What is your monitoring arrangement?
What kind of mandolin are you using?
Save some money on the 'Monster' cables and their ilk, by the way..... they do nothing for you any normal, standard, pro-level cable won't do at a fraction of the cost.
Gibson F5 'Harvey' Fern, Gibson F5 'Derrington' Fern
Distressed Silverangel F 'Esmerelda' aka 'Maxx'
Northfield Big Mon #127
Ellis F5 Special #288
'39 & '45 D-18's, 1950 D-28.
Bookmarks