Results 1 to 4 of 4

Thread: C string problems

  1. #1

    Default

    I've seen references in a few posts here that kind of dance around this subject but nothing that really addresses it head on.

    I've got a Fender FM60E 5-string. I like it well enough and I like the additional range offered and chord options (theoretically) made possible by that fifth string but what the heck can you do to make that C string usable/tunable/playable?

    Is this an issue with..
    ..all 5-string electrics?
    ..all Fender FM60Es?
    ..only this particular Fender FM60E?

  2. #2
    Registered User Lorenzo LaRue's Avatar
    Join Date
    Jun 2004
    Location
    Fort Bragg, CA
    Posts
    28

    Smile

    I'm not sure of your exact problem, however you might try making sure that the string gets wound in such a way that it "spirals" toward the peghead. This increases the angle at which the string goes through the nut slot, there is not much angle to start with. Another thing, check the string height as it passes throught the nut, making sure that the string sets solidly in the bottom of the slot. String height needs to be at least as big as the 1st fret is tall.
    Another basic thing is string height adjusted at the saddle. If your string is buzzing you might set it high and work your way down by trial. If when you fret that string, and it tends to roll over the edge of the fretboard get a thicker gauged string. I found the proper set of strings at http://www.emando.com/shop/strings5.htm . Good luck and I hope something here helps your situation.

    Jazzed, Bluegrassed and Swung
    2014 Steven Holst "Kay style' X-braced
    Lots of sustain and tonal range,
    Just what the Swing Doctor ordered!
    2008 Breedlove FF
    Fat and Woody!
    2003? David Hodson "Djangolin" Punchy
    Hot Jazzed, Choro-ed, and Swung
    Peace & Vision, Lorenzo

  3. #3

    Default

    If you've checked out all the above your problem probably lies in the actual string gauge your using for that scale length. Try looking at a string tension calculator to see what would work with a similar tension across the strings without the floppiness. You'll find one here



    Look up (to see whats comin down)

  4. #4
    coprolite mandroid's Avatar
    Join Date
    Oct 2002
    Location
    Outer Spiral Arm, of Galaxy, NW Oregon.
    Posts
    15,472

    Default

    if you are flummoxed by charts,
    Try a thick heavy string, 50 - 52 the E on guitar.
    example: for CGDA on my 4 string [13_7/8"scale] has a .049"
    tofurkey


    http://en.wikipedia.org/wiki/November_22#Events
    11-22-63



    writing about music
    is like dancing,
    about architecture

Similar Threads

  1. Thomastik infeld #string problems
    By Steamerman in forum Equipment
    Replies: 13
    Last Post: Aug-10-2008, 1:03pm
  2. New problems
    By Deaf David in forum General Mandolin Discussions
    Replies: 7
    Last Post: Mar-16-2007, 10:34am
  3. "A" string problems
    By Dennis Russell in forum Builders and Repair
    Replies: 5
    Last Post: Sep-29-2005, 4:54pm
  4. "A" String Problems
    By ourgang in forum General Mandolin Discussions
    Replies: 11
    Last Post: Jul-02-2004, 9:26am
  5. Tuning Problems with my E-string
    By FishwaterInc in forum Builders and Repair
    Replies: 14
    Last Post: Jun-03-2004, 11:07pm

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •