Results 1 to 12 of 12

Thread: 1920 AJr Bridge

  1. #1

    Default

    Hey Guys,

    I ahve a question about my 1920 AJr. It has (from what I've been told) the original bridge.
    Director of Operations - East Coast
    D'Addario & Company Inc.
    www.daddario.com

  2. #2

    Default

    ...and Now I'll learn to use a computer...

    anyway... Pics are available here: #
    http://homepage.mac.com/craigtoo/PhotoAlbum18.html

    Some more info on it:
    The fingerboard has been replaced. #The neck looks good and straight (slight curve to allow for strings to swing).
    The top seems to have settled in over the years.

    I've put Thomastik lights on there for 2 reasons. #I like the sound and I don't want too much force on the top or the neck. The Thomastiks sit lower in the nut slightly and perhaps in the bridge slots too. The neck is less flexed with the lighter tension strings.

    Subsequently, my action is too low and it buzzes when played even lightly.

    Here's the question.

    I think I need to replace the bridge. To get one that raises the action slightly. #Can anyone recommend a good one for this year Gibson?

    Thanks
    craigtoo
    Director of Operations - East Coast
    D'Addario & Company Inc.
    www.daddario.com

  3. #3
    Registered User Mike Buesseler's Avatar
    Join Date
    Sep 2002
    Location
    Whitefish,MT
    Posts
    1,721

    Default

    Craigtoo, #I was in a similar position recently with my 20s A model. #I'm not the expert you are looking for, but here's what I came up with.

    First, someone mentioned that bridge, tuners, tailpieces don't need to be original. #They are replaceable. #(You can always keep the original for resale if you want). #Your tuners are already replacements. #I tried a fixed bridge--forget it! #Much work, and then if you change strings or humidity, etc, you're stuck. # So, after checking around, I found that Peter Coombes builds mandolins more or less modeled after old Gibson As. #He uses a Brekke bridge which he modifies slightly. #Since I live in Montana, am on a first name basis with the Weber folks, including Vern Brekke, I just called him and asked if he'd make me a bridge like Peter's. #He did, and not only has the mando never sounded better, but the Brekke LOOKS almost like the original non-adjustable.

    I'd bet those light T-Is are the reason for your buzzing. # Not much tension there. #But, with an adjustable bridge, you could go with them.

  4. #4
    Registered User
    Join Date
    Oct 2002
    Location
    CA
    Posts
    43

    Default

    My A Jr sounded better (than its' previous great sound) after I had an adjustable Loar style bridge fitted to the top. Sullivan, Wood, or F5Journal all make great ones that will allow you to adjust string height. There are other things you can change, but they could offend a purist. Try this first; it is a common modification on an A.

    Wilson

  5. #5

    Default

    Thanks guys.

    I was visiting my friend in the Alps this weekend, he has a Coombe (#76 I believe) that bridge does look great. #A very elegant design....(not to mention a brilliant sound from that mando...)

    I do like the idea of having a bridge that needs no tools to adjust though.

    Perhaps I'll contact f5journal to see if he could supply me with one when I'm home in the states next month.

    My biggest concern was the difference in "foot patterns" between the 2. (Loar style and A style). #Will it make a difference if I don't stay with the same (original) foot pattern? #wdrysd seems to have had good results!

    thanks again for any comments!

    craig
    Director of Operations - East Coast
    D'Addario & Company Inc.
    www.daddario.com

  6. #6
    Cafe Linux Mommy danb's Avatar
    Join Date
    Jun 1996
    Location
    Norfolk, England
    Posts
    5,813

    Default

    Craig- try the Loar bridge repro. It's period correct (nearly) and certainly designed to work on a top like yours. Some mandolins I've tried recently with the adjustible type sound pretty good!
    The Mandolin Archive
    my CDs
    "The wheel is turning, but the hamster is dead"

  7. #7
    Registered Person
    Join Date
    Jan 2003
    Posts
    1,128

    Default

    Just the post I was looking for. Recently got my a-jr. and really should replace the bridge, Sullivan, Steve Smith, Randy Wood, all look like the 40-50 range, the brekke traditional about 90. Any suggestions?

    Craig, nice mando, what did you decide?

  8. #8
    Registered User
    Join Date
    Sep 2002
    Location
    Riner, Virginia
    Posts
    138

    Default

    Neal,
    #Daniel Smith makes an excellent Loar reproduction bridge for a bit less money than that, if you're interested I can send you his info. In fact I've got some extras right now, I'd be happy to send you one.

  9. #9
    Registered Person
    Join Date
    Jan 2003
    Posts
    1,128

    Default

    After searching the posts again, I found one for Roger Siminoff's repro bridge, just got off the phone with him, so search is over, for a bridge at least. And, wow, pretty inexpensive. Thanks, JOM.

    Scott, I love the search function here. Maybe if I used it more often I wouldn't be taking up so much bandwidth....

  10. #10
    Registered Person
    Join Date
    Jan 2003
    Posts
    1,128

    Default

    WARD, I just read your post, after I ordered it already! DANG.

  11. #11
    Registered User
    Join Date
    Sep 2002
    Location
    Riner, Virginia
    Posts
    138

    Default

    Man, when you say you're gonna order a bridge you don't mess around do you?

  12. #12
    Registered Person
    Join Date
    Jan 2003
    Posts
    1,128

    Default

    impulsive creature,eh? A little too impulsive, apparently

Similar Threads

  1. 1920 gibson a
    By mandopaul in forum Builders and Repair
    Replies: 6
    Last: Sep-30-2007, 4:55am
  2. 1920 (?) ajr, #68884
    By Martin Jonas in forum Videos, Pictures & Sound Files
    Replies: 27
    Last: Apr-14-2007, 1:11pm
  3. Proper bridge height for 1920 h2 mandola?
    By BlueMountain in forum Builders and Repair
    Replies: 2
    Last: Dec-19-2006, 4:42pm
  4. 1920 GIBSON A3
    By Dano Reible in forum General Mandolin Discussions
    Replies: 0
    Last: Jun-29-2006, 10:09pm
  5. 1920 Gibson A2
    By camando in forum Looking for Information About Mandolins
    Replies: 13
    Last: Nov-03-2004, 10:13pm

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •