Results 1 to 7 of 7

Thread: Oval hole strap mounting

  1. #1
    Struggle Monkey B381's Avatar
    Join Date
    Jun 2016
    Location
    North Carolina
    Posts
    396

    Default Oval hole strap mounting

    Just picked up an Eastman oval hole. The sound and playability are amazing.

    Trying to get used to the strap on the peghead as there is no elevated fretboard.

    Other than installing a pin, what is your method of mounting your strap? Yep, I searched first.

  2. #2
    Registered User Denman John's Avatar
    Join Date
    Aug 2009
    Location
    Denman Island, BC Canada
    Posts
    663

    Default Re: Oval hole strap mounting

    Headstock between the nut and lowest tuners.
    ... not all those who wander are lost ...

  3. #3
    Registered User
    Join Date
    Jan 2009
    Location
    S.W. Wisconsin
    Posts
    7,507

    Default Re: Oval hole strap mounting

    Headstock but not near the nut, it is always in the way. I string it between the G and D tuners on that side and between the A tuners on the other. To me it is the best support, I don't like it on the heel, and out of the way.
    THE WORLD IS A BETTER PLACE JUST FOR YOUR SMILE!

  4. #4

    Default Re: Oval hole strap mounting

    I tried going online to get a better view of the fretboard of an Eastman A-style oval hole to see if it has a raised fretboard. I was looking at photos of the 504 model, but I couldn't tell.

    If it does have a raised fretboard with a gap between it and the top, you can attach a strap between the fretboard and top ahead of the oval soundhole. I have two Collings A style mandolins: an MT and an MTO. Both have straps attached to them as described.

  5. #5
    Struggle Monkey B381's Avatar
    Join Date
    Jun 2016
    Location
    North Carolina
    Posts
    396

    Default Re: Oval hole strap mounting

    As I posted, it does not have a raised fret board.

  6. #6
    Registered User
    Join Date
    Jan 2009
    Location
    S.W. Wisconsin
    Posts
    7,507

    Default Re: Oval hole strap mounting

    Mine has a raised fretboard, I prefer to use the headstock. I also have a button on the heel, I took it off. I prefer to use the headstock. To me it is a better balance and easier to get on and off.
    THE WORLD IS A BETTER PLACE JUST FOR YOUR SMILE!

  7. #7

    Default Re: Oval hole strap mounting

    Install a pin. I know you said other than installing a pin, but I think you will be unhappy with the headstock solution. It's pretty easy, drill a pilot hole and use wax when setting the screw.
    Girouard Custom Studio A Oval
    P.W. Crump OM-III

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •