Results 1 to 7 of 7

Thread: Gibson flat iron help

  1. #1

    Default Gibson flat iron help

    I'm looking at this mandolin on Craigslist and can't seem to find any info on it but lots of discussion on the cafe so please redirect me to the proper thread if it exists.

    All it says is it's a Gibson A Flatiron made in Nashville for $200. Something doesn't seem right. I've included a link to the ad so you can see the picture. Please don't bogart the mandolin if you're in the area.

    https://ventura.craigslist.org/msg/d...412477747.html

  2. #2
    acoustically inert F-2 Dave's Avatar
    Join Date
    Jan 2009
    Location
    Halfway, MO
    Posts
    1,997

    Default Re: Gibson flat iron help

    Is that one of the Opry Mills mandolins?
    "Mongo only pawn in game of life." --- Mongo

  3. #3
    Registered User almeriastrings's Avatar
    Join Date
    Mar 2011
    Location
    Almeria, Spain
    Posts
    5,165
    Blog Entries
    3

    Default Re: Gibson flat iron help

    Opry Mills 'Pancake' model....I think they were only about $200 new....

    Not in the same league as a 'genuine' Flatiron.... these were more of a 'souvenir'.... generally agreed to be pretty dire.
    Gibson F5 'Harvey' Fern, Gibson F5 'Derrington' Fern
    Distressed Silverangel F 'Esmerelda' aka 'Maxx'
    Northfield Big Mon #127
    Ellis F5 Special #288
    '39 & '45 D-18's, 1950 D-28.

  4. The following members say thank you to almeriastrings for this post:


  5. #4

    Default Re: Gibson flat iron help

    Seems like it's safe to say it's junk. Price still seems low for a Gibson even if it's an import

  6. #5
    I really look like that soliver's Avatar
    Join Date
    Sep 2015
    Location
    Marietta, GA
    Posts
    730

    Default Re: Gibson flat iron help

    Someone please corrected me if I’m wrong, but I believe that after Gibson bought Flatiron, they started producing this cheap-o version of the Flatiron 1N that is really more a novelty than It is a quality instrument.

    If you’re interested in this style of Mando, then buy a Flatiron 1N (or any of its fancier siblings) pre-Gibson. There are also any number of current reproduction pancakes made very well and worth far more $$.

    Long and short, don’t buy this.
    aka: Spencer
    Eastman MD-305
    Flatiron 1N

    Hand Crafted Mandolin Armrests
    Check them out here

    "You can never cross the ocean unless you have the courage
    to lose sight of the shore, ...and also a boat with no holes in it.
    -anonymous

  7. #6

    Default Re: Gibson flat iron help

    I do not have experience with pancake style mandolins. But if you live near this instrument why not go play it?. If it plays easily and in tune, and you like the way it sounds, I don’t see that you can go very far wrong paying $200. Or if that’s a stretch can make the seller an offer, and walk away if you can’t come to terms.
    BradKlein
    Senior Producer, Twangbox
    Twangbox Videos

  8. #7
    Moderator MikeEdgerton's Avatar
    Join Date
    Mar 2007
    Location
    40.191N -74.2W
    Posts
    19,927

    Default Re: Gibson flat iron help

    Gibson sold these at the Opry Mills store/facility they had. I made the mistake of buying one on eBay years ago when I didn't know any better. They took a truss rod cover that was engraved Gibson that was actually used on some Epiphone's and cut it down and screwed it (with one screw) to the headstock. There is no truss rod. This way you could buy a mandolin at the Gibson store for around $200.00. They were about $150.00 over priced and they sold a number of them. I don't think they had a warranty of any kind and were simply novelties for the tourist trade. I don't know if this was a way to get rid of some old Flatiron pieces. They were really pretty rough.

    That didn't take me too long to find. Big Joe Vest worked at Gibson during the time period these were made. Read his comment at the end of this string.
    "Bargain instruments are no bargains if you can't play them". These are the words of J. Garber.

  9. The following members say thank you to MikeEdgerton for this post:


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •