Results 1 to 13 of 13

Thread: Looking for black walnut back and sides for F5 build

  1. #1

    Default Looking for black walnut back and sides for F5 build

    Hi gang!

    Long time lurker, first time poster....yada yada yada.

    So, after building a few guitar kits, and 2 non-kit guitars, I'm about to try my hand at an F5.

    I think I'll be using western red cedar for the top, and I'd like to use black walnut for the back and sides, but for the life of me, I cannot seem to find good black walnut stock.

    Anyone able to point me in the direction of someone that sells BW that's somewhat close to the necessary size (i.e not a lot of milling required...limited large scale tool availability).

    Thanks in advance for any tips!

  2. #2
    Member
    Join Date
    Oct 2009
    Location
    Central Illinois
    Posts
    3,563

    Default Re: Looking for black walnut back and sides for F5 build

    Check with Bill Bussman aka Old Wave mandolins !

  3. #3

    Default Re: Looking for black walnut back and sides for F5 build

    Where do you live?? Several sources near me in southern Michigan.

  4. #4
    Registered User bernabe's Avatar
    Join Date
    Sep 2010
    Location
    Winston-Salem, NC
    Posts
    586

    Default Re: Looking for black walnut back and sides for F5 build

    I have some you can have if you cover shipping, however only book-matched wedges and a neck blank with no curl. Nothing exciting, but with "some" character. The tree was already cut up so I couldnt get the long F5 rib. Side wood stock should be easy to find at any hardwood store. PM if you need to. Here's half of a book-matched back set...everything I have looks like this. Click image for larger version. 

Name:	20171227_120531.jpg 
Views:	160 
Size:	708.1 KB 
ID:	163481

  5. #5
    I may be old but I'm ugly billhay4's Avatar
    Join Date
    Dec 2003
    Location
    Lakebay, Wa
    Posts
    4,162

    Default Re: Looking for black walnut back and sides for F5 build

    These guys have nice stuff.
    Bill
    IM(NS)HO

  6. #6
    Registered User amowry's Avatar
    Join Date
    May 2004
    Location
    Bend, OR
    Posts
    2,168

    Default Re: Looking for black walnut back and sides for F5 build

    If you search for Claro walnut that may help. There are a number of places here on the West coast that specialize in it.

  7. #7

    Default Re: Looking for black walnut back and sides for F5 build

    Try these guys, I'm doing a guitar build and just ordered a set of BW last week.

    http://www.lmii.com/products/mostly-...s/walnut-black
    Northfield F5M #268, AT02 #7

  8. #8
    Registered User Wilbur Tabacsko's Avatar
    Join Date
    Jul 2010
    Location
    Penn Run, Pennsylvania
    Posts
    83

    Default Re: Looking for black walnut back and sides for F5 build

    Anywhere near Pennsylvania?
    Click image for larger version. 

Name:	20171229_092101.jpg 
Views:	176 
Size:	1.00 MB 
ID:	163595

  9. #9

    Default Re: Looking for black walnut back and sides for F5 build

    How would black walnut affect the tonal quality of a mandolin?

  10. #10
    two t's and one hyphen fatt-dad's Avatar
    Join Date
    Nov 2003
    Location
    Richmond, Virginia
    Posts
    7,635

    Default Re: Looking for black walnut back and sides for F5 build

    My mandolin is walnut and redwood.

    Love it!

    f-d
    ˇpapá gordo ain’t no madre flaca!

    '20 A3, '30 L-1, '97 914, 2012 Cohen A5, 2012 Muth A5, '14 OM28A

  11. #11

    Default Re: Looking for black walnut back and sides for F5 build

    Try a sawmill in Illinois near you. The only problem that I have had while looking for walnut is finding it quartersawn. Most sawmills will have some that is close enough to QS for a one piece back with plenty for ribs and neck block from the same board.

  12. #12

    Default Re: Looking for black walnut back and sides for F5 build

    I have had real good success with bluegrass and old time fiddles with black walnut back, sides and neck. The players love them and so do iI.Have not tried it witha mando yet, but it is on the schedule. Tone depends on the builder, but my opinion is that it tends to have a little more volume and less muted tone than maple . Try it, you will like it.

  13. #13

    Default Re: Looking for black walnut back and sides for F5 build

    If you are in Illinois, go to Pekin Hardwood Lumber in the town by that name. Pick out a plank cut from the center and have them resaw it to your needs. Illinois river valley black walnut is world renowned.

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •