Results 1 to 9 of 9

Thread: Can I get a softer sound for the Blueridge in CGDA ?

  1. #1

    Default Can I get a softer sound for the Blueridge in CGDA ?

    I appreciate that queries about strings can get a little repetative, but I'm not sure if this has been asked before. I'd like to stick with playing CGDA on my BR40, but sometimes the brightness of it is a bit too... bright for my ears, and I'd like it a touch mellower. I'm using J66s. I wondered if anyone has tried silk and steel on this kind of tenor, and if the appropriate gauges are available. I guess the tension is less, and you could use slightly heavier strings.
    Grateful for any wisdom and/or experience out there.
    "What's that funny guitar thing..?"

  2. #2
    Registered User fox's Avatar
    Join Date
    Feb 2014
    Location
    Guernsey... small island just off the coast of France
    Posts
    1,018

    Default Re: Can I get a softer sound for the Blueridge in CGDA ?

    Nylon strings sound ok on the Blueridge , you get a lot of sustain but not much volume, however I don't think you could get the A in CGDA on a 23" scale. It is just possible on a 20" scale, you could drop an octave but then the strings would be mega thick.
    GDAE works with nylon, you can get around 60lb of tension & they sound pretty good if you are in a quiet room.
    I have a couple of nylon string custom made tenors and they both sound amazing!

  3. #3
    '`'`'`'`'`'`'`'`'`'`' Jacob's Avatar
    Join Date
    Sep 2002
    Posts
    896

    Default Re: Can I get a softer sound for the Blueridge in CGDA ?

    The J66s have 80/20 bronze (brass) wound strings. Phosphor bronze or nickel shouldn't sound so "bright". Individual Silk & Steels are also available. (nfi)

  4. #4
    Registered User
    Join Date
    Dec 2002
    Location
    Nashville, TN
    Posts
    1,596

    Default Re: Can I get a softer sound for the Blueridge in CGDA ?

    Silk and steel will soften the tone of the wound strings. The plain steels in a silk&steel set are usually lighter than normal too, which might not improve the treble tone. It may take a little experimentation

    I definitely would not use 80/20 strings. +1 the suggestion to try phosphor bronze or nickel.

    You could also try tuning down (a half or full step), and capo'ing up. This will reduce the tension and soften the playability, or you can compensate with slightly heavier strings.
    Jeff Rohrbough
    "Listen louder, play softer"

  5. The following members say thank you to acousticphd for this post:


  6. #5

    Default Re: Can I get a softer sound for the Blueridge in CGDA ?

    You might also consider flat-wounds. As they age they get that mellow jazz tone.
    VerneAndru.com | oKee.ComX

    - ---==< V >==--- -

  7. #6

    Default Re: Can I get a softer sound for the Blueridge in CGDA ?

    I can hardly put down my BR-40T with the Thomastik flatwounds. They are so slinky, and I quite like the tone. I use the Thomastiks only on the C and G wound strings and use D'aDarrio NYXL high carbon steel for the plain D and A string. The guages I order are .033, .023, .014, .010.

    Scott

  8. #7

    Default Re: Can I get a softer sound for the Blueridge in CGDA ?

    TI's are fabulous strings. Like silk.
    VerneAndru.com | oKee.ComX

    - ---==< V >==--- -

  9. #8

    Default Re: Can I get a softer sound for the Blueridge in CGDA ?

    Thanks for the ideas! I'll see what I can order. I don't really want to tune down and capo up, as I find sticking a capo on a small guitar rather invasive. Flatwounds, eh? I used to love the flatwounds when I played bass, so that's an attractive idea. I'll report back when I get round to doing something.
    "What's that funny guitar thing..?"

  10. #9
    Registered User colorado_al's Avatar
    Join Date
    Jan 2007
    Location
    Boulder, CO & Chesterfield, MO
    Posts
    1,140

    Default Re: Can I get a softer sound for the Blueridge in CGDA ?

    You can also try flatwounds for electric guitar. I like the D'addario XL Chromes Flat Wound Singles.
    According to the daddario tension pro site, you could use .022 for the G and .032 for the C.
    http://stringtensionpro.com/SetBuilder?set=J66
    http://www.stringsandbeyond.com/dsichststflw.html
    2016 Franzke A5 Custom w/Rubner tuners & James Tailpiece & McClung Armrest
    2011 Collings MT Custom w/Rubner tuners & McClung Armrest
    2014 JBovier A5T w/Grover 308 tuners & McClung Armrest
    2015 Blueridge BR-40TCE Tenor to OM conversion
    1999 Tacoma M2E
    2011 Big Muddy MM-8 MINI-MO
    2005 Malagoli solid-body electric cavaquinho

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •