I like the snark. Even consistantly reads the low E on my bass. Low price too.
Type: Posts; User: Richard Sanabia
I like the snark. Even consistantly reads the low E on my bass. Low price too.
If I hit this note, your Vulcan ears are toast....
Can you guys please help me ID this one? The back of the headstock says made in USA, Model 319.12971000.
.....This happened to me after spraying a project with lacquer that the factory had changed formulation....
Mike, DOUBLE box it! Well worth the peace of mind, and the few extra dollars. I ship my stuff all over and they always survive.
:( Can you post a picture?
I have been selling on ebay for 10 years, and I always put insurance on items that exceed $100 to protect my BUYER. UPS provides $100 insurance free. The USPS will settle any claim at the local level...
I enjoy these great posts. I thank all who jump in with their research, viewpoints, and experience. Without thinking about the effect of bracing or tone bars on the back, I put a "X" brace on the...
I've watched many mandos on Shopgoodwill, and if they are current models, will almost always go for more than equivalent retail prices, or even ebay prices. As an example, used Rogue mandos going for...
Wow, my sixteenth notes MUST be getting caught in the kerfing because my smarty pants fiddle playing wife will occasionally holler at me that the notes I am playing aren't sixteenth notes, but...
A little thanks coming to you from from Tennessee......Richard
I lost mine for a week, and found it again in another case I forgot I had opened to play. Whew...
Hi Mario, Try a couple of U-bolts to hold the grinder on a piece of plywood, then attach a door hinge to it, then the other end to another piece you can clamp to the bench. I used a v-block to lay...
I mounted a Dremel sideways in a little homemade chopsaw frame. I hadn't seen the little chopsaw Paul has. Very nice! I took apart a Dremel drill press, (very cheap), and machined a nice hinge to...
Hi Mario, I like SS a lot also. I was a machinist also. I made cabinets, and other wood stuff. I am not a real luthier, but I love making dulcimers, and mandolins, learning a LOT from the Cafe. I...
Go Here: http://www.bluegrassmusicjams.com/jam-tennessee.html. Shows jams for all the states on the home page...
I am using Lyptus, works beautifully, and looks great.
Down in the description it says uke. 14.8 scale.
Hi Mike, The deer bone is too soft. I tried it several times, with different pieces, but all were too soft.
At McMaster.com you can buy screws as small as #2 in brass, steel, etc., in boxes of 100 for great prices, ex., #2 x 1/4" for $2-3 for bx of 100, slotted or phillips, brass, steel.
I used a bridge like that on a cigar box guitar I made.
There was a fretless mandolin on Youtube awhile back. It was a white one that had a viola fingerboard that replaced the regular fret board. It was a four string, and the guy played it like a mandolin...
The neck feels MUCH better than I thought it would. The blend was easy, as the overhang blended well. Since the overhang was split, the result was better than I thought it would be.
Hi, I recently replaced the fret board on an old flat top someone gave me. I like it very much, and to make it playable I had to repair the fret board. I wanted to raise it a bit so I removed the...