Search:

Congrats on the BM - a lowly F5S came by here 2 weeks ago -- I havent been seen since

Ultra low needs IMHO a little neck relief

And I anybody shouldn`t know, the name of the tune is : " Mama i have to pee"

Well back home to my trusty " Dictionary of Garderning " ( The Royal Hortocultural Society 1951 ) a 4000 pages listing of species.
I´ll agree that the picture shown could be (hardpruned)...

Definitely not Corylis c. -- however that link won`t satisfy any botanist
Jens

Hey Clark
my writing was of the head. Corylus c. is a very "symmetrical" tree and performs well as a street tree around here .and I am pretty certain that I also will in the Carolinas... I´ve been...

As a dendrofreak of 45+ years I would be interested in which species it is --- I do doubt that is native, but maybe Turkish Hazel ? Corylus colurna worldwide cultivated- also as a ornemental-- ...

My BMI are 17.9, my pointy ribs keeps the flesh inside and the mando free of the body
jensh

Never heard that anybody than Garcia, Dawson and Hunter should have been involved in the writing of Friend of the Devil

Perfectly right to me-- seller is in Wrong Kong
Sorry

Hey Brick and all
I had an Engelmann MT topped about 5 years ago -- sold it and missed it -- thought I would try the torrefied Sitka ( It still smells "sauna" ) -- Memory is a fickle thing, this is...

Well, I recently bought a bare bone ( my favourite aesthetic ) MT t , how did it fare
Jens Denmark

Well, to avoid mishaps-- at the bottom on the peghead side --- not the bottom of the nut
Jens;)

A hairline of CA at the bottom, peghead side of the nut, is the way I snug fit nuts -- remember to let the CA cure ! ---eventually tape off the bottom - final fitting can be done with a scraper. --...

on my 950 I found a considerable lean of the tuning posts - I changed the bushings to Rubners - they fixed the tuning problem by 95% the missing 5% I suspect is due to the worm under construction --...

Prucha CZ sells Schuster cases -- I have a couple for my banjos -- they are very well made
Jens

KM 950 are worm under tuners, I do not think that Rubner makes these ??
The period correct bushings on the KM does not support the shafts at all and provides malfunction.
I changed the bushings to...

When the fit is good (crosssanding) I will scrape away some material from the bottom only leaving about 1 cm untouched at the
ends.
When strung up, the tension will conform the bridge base to the...

Changed the Elites on my Flatbush A to Rubners --- drop fit except for the screwholes --- what a breeze, the Rubners are very good.
I have a hard time tuning my KM 950. The Gotohs, worm under, works...

Though I do admire Tim O`Brien highly, Darrell Scott is a mountain.
I need to listen to him everyday -- makes my day better
Jens

I had 2 mandos shipped from the US, a collings mt from TMS and a km950 from IA both arrived with way to much bow in the neck i guess due to atmospheric "play" --- freight, VAT and handling will...

EVO ate half of my Stew-Mac cutter in one refret ( might have been a bad one) -- gone to a japanese offset fretcutter from ToneTech UK - no problem
Jens

In my understanding, a 12th fret neck joinery means an A 4 ????? or if I am wrong, please enlighten me.
Jens

Had a strange experience with an epoxy supposed to be HQ
Mixed with ebonydust it was still sticky after 2 month
Mixed with mahoganydust as well as unmixed it cured within the expected time....

well half of my post disappeared again pretty straining for my Asperger. cont.

Theres one other spruce in Europe (Serbia ), the endemic P. omorica "seed wise " there is a sad story connected...