Search:

Type: Posts; User: rcc56

Page 1 of 20 1 2 3 4

Search: Search took 0.01 seconds.

  1. Replies
    13
    Views
    417

    Re: 1915 Gibson A Pickguard issue

    Whatever you do, protect the top underneath. Sometimes the guard will let go suddenly and come flying off with a vengeance. If that happens, a nail can put a deep scratch in the top.

    I try to...
  2. Replies
    13
    Views
    417

    Re: 1915 Gibson A Pickguard issue

    The pins [they are really nails] on these 'teens Gibsons go right through the fingerboard at a significant downward angle [maybe 30 degrees] and penetrate the top.
    It can be difficult to get them to...
  3. Replies
    9
    Views
    402

    Re: Cracked banjo headstock

    CA glue is a very bad choice for this repair. If it does not hold [which is very likely], it will seal the wood pores on the surface of the break. Then, it will be nearly impossible to repair it...
  4. Replies
    12
    Views
    598

    Re: Opera singer guitarist in need of help

    If you are speaking of the aria with mandolin accompaniment, and you are going to be singing the aria, you will find it very difficult, if not impossible, to play the accompaniment well while you are...
  5. Thread: Cracked Bridge

    by rcc56
    Replies
    22
    Views
    754

    Re: Cracked Bridge

    With a little luck, the saddle from a new Golden Gate bridge will fit on your current bridge base, and you won't have to modify anything.
  6. Thread: Cracked Bridge

    by rcc56
    Replies
    22
    Views
    754

    Re: Cracked Bridge

    I used to try to glue cracked saddles back together. I've tried four different kinds of glue with no long-term success. Some gave way immediately, while the one that held up the longest might have...
  7. Re: Martin Krajicek and "unusually octave" mandolin.

    This tuning used to be more common than it is now. I believe Howard Armstrong [a.k.a. "Louie Blooie"] used it sometimes, as did other blues/jazz/ragtime players.

    Norman Blake used it on the...
  8. Replies
    9
    Views
    743

    Re: does this look right?

    Hmmm. It looks like the grain may be running through the line. If so, it might not be a joint at all. But it definitely looks like a splice in your first picture.

    An in-hand inspection with a...
  9. Replies
    9
    Views
    743

    Re: does this look right?

    It looks like a splice to me.
    I would be very surprised if it originally left the factory like this.

    I can't say for sure without seeing more pictures, but the most likely explanation is that the...
  10. Re: Hypothetical high dollar mando purchase question...

    There are no Nuggets for sale in Nashville today. They turn up fairly often, though. I don't know how many he has built with a wider neck.

    Gruhn Guitars carries Newson mandolins. I've played...
  11. Re: Lyon & Healy Style A #1674 1925 - looking for info

    The last fretted instruments built in the Lyon & Healy factory were made in early 1928. They continued to make harps, and still do. They also continued to operate a number of retail stores.

    Tonk...
  12. Replies
    5
    Views
    430

    Re: a little help here

    Hot hide glue.
  13. Replies
    26
    Views
    1,860

    Re: Heads up! Nitrocellulose products dwindling

    Non polyurethane varnishes are getting scarce also.
    Water based varnishes are varnish in name only.
    Violin varnish and raw shellac are still available.
  14. Replies
    19
    Views
    652

    Re: Lyon and Healy Style C with planed fretboard

    As long as the neck is straight and the instrument seems to be stable, there is no major concern. There is enough wood there for a refret. The frets at the angled end of the fingerboard can be left...
  15. Replies
    19
    Views
    652

    Re: Lyon and Healy Style C with planed fretboard

    If the existing fingerboard is doing its job, the only reason for replacement would be cosmetics, not structural concerns.
    In other words, "elective surgery."
    Fingerboard replacement will increase...
  16. Replies
    19
    Views
    652

    Re: Lyon and Healy Style C with planed fretboard

    To refret and adjust that mandolin in my shop would cost perhaps $450 to $500 if the neck is straight, the fret slots are correctly located, the nut can be re-used, and there is no additional work...
  17. Re: Lyon & Healy Style A #1674 1925 - looking for info

    I will add that your style A is one of the latest ones that has come to my attention. The only carved top L & H/Washburn instruments that I have personally seen that were made much later were style...
  18. Re: Need suggestion on removing bad finish from a build.

    You can mask the bindings while the rest of the instrument is being stripped.
    You might start out dry, and carefully try some coarse steel or plastic wool or even a coarsely sharpened cabinet...
  19. Replies
    18
    Views
    869

    Re: Looking for a GOOD flat top mandolin

    Don't forget older flat tops, such as those made by Martin, the Larson Brothers, Vega, and even some of the better instruments made by Regal and Oscar Schmidt.

    For whatever it is worth, every...
  20. Re: Musical Instruments To Be Exempt From Restrictions

    Easy, folks. Although the amendment has been passed in committee, it has not yet been passed by the CITES convention at large. Although I am guardedly hopeful, nothing changes unless they do indeed...
  21. Re: Lyon & Healy Style A #1674 1925 - looking for info

    The Lyon and Healy Style A mandolins were introduced in 1917 at a list price of $150. The earliest examples of this model had a ~13 3/4" scale, and symmetrical body points. A mandola and mandocello...
  22. Re: Electronic tuner: guide, or unquestionable authority?

    Fletcher Bright, leader of the less than well-known Dismembered Tennesseans, included the following line in his stage patter on every show while his mandolin player was frantically retuning between...
  23. Replies
    5
    Views
    498

    Re: Restringing Gibson

    You might not have to change the nut and saddle. Try changing the strings first, and see how it behaves.

    Let Marty work out the gauges for you. If you want octaves on the 3rd and 4th, he'll need...
  24. Replies
    9
    Views
    846

    Re: Crack~say it isn't so!

    I've been keeping my nose out of this one for reasons the OP understands. But . . .

    While I believe in servicing all cracks, some are of minor consequence, and some must be serviced as soon as...
  25. Replies
    26
    Views
    1,860

    Heads up! Nitrocellulose products dwindling

    It looks like the manufacture of nitrocellulose products is winding down.

    Behlen has been absorbed by Mohawk. Mohawk is offering a modest selection of nitrocellulose products.

    Stewart...
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4