Re: Useful Tip For Changing Strings
Just changed my first mandolin strings on a friends mandolin. My friend had an old Suzuki (model 100) that I borrowed to get a feel for a flat, violin scale fretboard. While in my possession I decided to clean it up and change the strings. Never having done that before I came to the Cafe for a little guidance and found this post. I used the information posted by Sblock in post #4 to make it a relatively painless job even though I had to contend with a hinged tailpiece that required me to bend the strings to get the loops to attach. My friend just wants the mandolin as wall art so I didn't tune the strings all the way up to pitch but I'm happy with the way that everything turned out.
Rob
Re: Useful Tip For Changing Strings
Quote:
Originally Posted by
archerscreek
Yeah, I thought about using a capo. But I changed strings two days ago and thought the main problem was the roundness of the loop hole. So using the same needle nose pliers I cut the excess string length with, I carefully and slightly squeezed the loop in a bit before installing the string. None of them slipped off the hook after doing that.
Never seeing one up close, doesn't a James Tailpiece keep the loops on the hooks when changing strings? Seems like every mandolin should wear those.
...please explain what is meant by "using a capo" when changing strings,
Re: Useful Tip For Changing Strings
Quote:
Originally Posted by
mando-tech
...please explain what is meant by "using a capo" when changing strings,
Looks like the person you quoted has not been around in a couple years, so I'll hazard a guess that this is all about how folks keep the loops from slipping off the tailpiece posts on those designs where the string goes straight through, with no bend, friction or maybe hinged cover clamping to keep them from slipping off while the loose end is being wound on the tuner. A capo keeps some tension on the string between it and the tailpiece.
Me, I stick a pepita-sized dab of Blu-Tack/Fun-Tak/Blu-Stick kind of stuff on the post to hold the string there, removing it after the string is on.
Re: Useful Tip For Changing Strings
A question for the folks on this thread. Being an old mechanic, when I replace my stings I attempt to keep the tension even across the fret board. My pattern is to change the outside G string, then change the outboard E string and then change the inside G sting then the inboard E and so forth. Am I being silly in attempting to keep the tension even across the fretboard? Would appreciate your input.
Jim in Ohio
Re: Useful Tip For Changing Strings
Quote:
Originally Posted by
Buddelje
A question for the folks on this thread. Being an old mechanic, when I replace my stings I attempt to keep the tension even across the fret board. My pattern is to change the outside G string, then change the outboard E string and then change the inside G sting then the inboard E and so forth. Am I being silly in attempting to keep the tension even across the fretboard? Would appreciate your input.
Jim in Ohio
If your instrument has a moveable bridge, then it is certainly a good idea to keep tension on to keep it from moving. For an instrument with a fixed bridge, that wouldn't be a problem.
Other than that, I'm not sure it would make much difference. Please correct me if that's wrong.
Re: Useful Tip For Changing Strings
Quote:
Originally Posted by
Buddelje
…. when I replace my stings I attempt to keep the tension even across the fret board. My pattern is to change the outside G string, then change the outboard E string and then change the inside G sting then the inboard E and so forth. …
The string tensions are not so different that *which* single string is swapped is going to make a difference (IMO). So, if I’m only changing strings, I do them a course at a time, e.g., the G strings, then the Ds, etc. That way I only have one new pair unwound at a time laid out.
Re: Useful Tip For Changing Strings
Some great tips here tonight. Personally, I never change strings or even buy strings. Just buying a new mandolin every year seems to take care of it.
Re: Useful Tip For Changing Strings
Quote:
Originally Posted by
Matt
Some great tips here tonight. Personally, I never change strings or even buy strings. Just buying a new mandolin every year seems to take care of it.
So what do you do with all of those old gnarly-stringed mandolins Matt? Curious minds want to know. ;)
Len B.
Clearwater, FL
Re: Useful Tip For Changing Strings
Those old strings are perfect for cleaning out the venturi on the carburetor on your lawn mower or snow blower. Enjoy!
Re: Useful Tip For Changing Strings
I’ve been putting on strings using the hitch for many years, but recently started using the wrap-then-poke method and think it’s a better way.
Put on some new strings today, and only got stuck once! I probably need to get a tetanus booster.
Re: Useful Tip For Changing Strings
Quote:
Originally Posted by
RobP
Can you clarify what you mean by "reverse lock method"?
Thanks
Here's a popular YouTube video of RLM
https://www.youtube.com/watch?v=q2Hk34p2OBA
Re: Useful Tip For Changing Strings
In addition to "wrap & poke." Mind where the little hole (in the tuning post/peg) is oriented. It prevents one from ramming a string into one's thumb.