I have done this: use a flat ribbon piezo, seated right under the bridge.
The piezo ribbon is connected to a small preamp (somehow attached securely to the viloin body).
The preamp is wired to a...
I have done this: use a flat ribbon piezo, seated right under the bridge.
The piezo ribbon is connected to a small preamp (somehow attached securely to the viloin body).
The preamp is wired to a...
Where can I get the MISI endpin jack ? Looking up eBay but found none.
I did shim the saddle up. It is very playable now. But I intend to straighten the bowed neck to improve my repair skills. A friend gave me this ukulele as he knows I love repairing instruments.
Bought an USA made mandolin (label says: Columbia mandolin), do some TLC to put it in good shape (cosmetics), then strings it with new strings. The top sinks down on the bass side !!! (I kind of...
I have carved a neck for an instrument I build from scratch. The labor is intensive. But matching the two broken pieces is out of my skill (including adding a wafer piece). And the owner really care...
I have a cello (which was damaged and I repaired it) with the back looking like this:
165822
I have seen many photos of instruments with flamed maple on their back. And my cello looks just like...
This is a Cremona SC-200 cello, costing around 900$ brand new. Yesterday, the owner (father of the girl who plays) SOLD it to me for 65$ , cheap due to that ugly excess glue. So I took the chance to...
Another option is to get a concert ukulele and get a Aquila string set to be tuned in fifth (not a normal ukulele string set).
You will get an instrument with mandolin tuning that sounds loud and...
Honestly, I don't know as I have not done it yet.
I plan to print one with a color ink jet printer, and one sheet with a laser color printer.
Then see which one works. Hopefully both work.
Buying...
I just bought a bowlback mandolin, the label inside says VALENCIA.
I did not know anything about this brand. But when trying it, it sounds very loud for a bowlback, compared the 3 bowlbacks I bought...
Thanks for the reply, I will look into the saddle and see what's under the D string position.
OK, that should nailed it. "vibration in all other parts" means some energy are wasted in these "immovable objects" instead of making the top & back vibrating. And this does reduce the sound volume...
Yes, the string angle is so shallow and therefore the force that pushes down the top sound board is very small, I could push the while saddle back and forth with string pressure.
"Typically": ...
I found a smaller body guitar, neck joint at fret#12, nut width 1"5/8, width at fret#12 is 2", with an adjustable bridge (easy to adjust action).
Going thru the normal guitar to OM conversion (my...
I used the same method (1 2 3 4 5 6, not just 1 4 5) and after practicing for sometimes (months), I could play in a key that is different that what the sheet music and/or the chords show (even the...
I went thru the effort to cut off the back.
141418141419
- - - Updated - - -
once the back goes off, here is how it looks inside
141420
I bought quite a few instruments from eBay in the last few years (at least 12) and I am happy with what I received. The trick is to know specs of these instruments and the condition of the listed...
Yes, I have one persimmon tree in my home (California) and it produces delicious fruit by this time (November) each year.
Never though that its wood could end up in a mandolin. (I frequently play...
I did, it was a cheap one (when brand new) and had a twisted neck :crying:
Very few recorders are intuitive to use. And the manual is also scary.
For example: to record a song on the BOSS microBR, the manual shows a "state of the lost art" sequence of steps, a dozen I...
This is so true, I have to use transducer with good built-in preamp to get good sound, not the best, but quite acceptable to my ears.
Some do, some don't. I bought a few guitars with a passive...
I bought a leather belt, about 1/2 inch wide. And turns it into a F-style mandolin strap. The strap end that goes into the end pin has a hole cut clean. The other end goes around the scroll....
It's hard to find a good set of NYLON string to match a baritone for CDAE tuning. If you use steel strings instead, a matching set would be the one for a bouzouki around 20" scale length. You will...
Thanks for the correction. I always got confused with these terminologies.
Here is mine (with original guitar bridge, no tail piece).
135125135126135127135128
Please note the "fret zero" (that did not exist on original guitar).
The fret zero fixes an intonation problem...