View Full Version : Where Does this ? go?

Stanley Cox
Sep-27-2004, 8:03am
OK I am lost. Wife says stop and ask directions. I have followed the directions I find but still no pics. SJennings
I hear you snickering. http://www.mandolincafe.net/iB_html/non-cgi/emoticons/biggrin.gif
I click add reply;
I type message;
I scroll down to browse and click;
Window with pics open;
I highlite pic and click open;
File name goes into browse add. box;
Click add reply;
Error page "server can't find page"
So now I am asking for directions on how to post a pic.
Thanks, Stanley

Sep-27-2004, 5:10pm
Hi Stanley, it may be that your picture file is bigger than the message board will allow. To the left of the "Browse" box, it says "Maximum file size (in bytes): 76800". You need to check your picture file size to see if it is 76.8 kb or less. If it is bigger than that, not to worry....open up the picture you want to post in your favorite picture-editing software and make it smaller. If you use Microsoft Paint (go to Start, then Programs, then Accessories, then Paint), it's easy. Open the Paint program, then click on File, then Open, and select the picture file you want. Now, click Image, then Stretch/Skew. In both the Horizontal and Vertical boxes, type in a number less than 100%, and the picture will get smaller. Make sure you type the same number in both boxes so that the proportion is kept the same. Once you get the picture down to 76.8 kb, it should post with no problem using the steps you described.

Good luck!

Stanley Cox
Sep-28-2004, 12:45pm
You mean like this?


Stanley Cox
Sep-28-2004, 12:52pm
Wooo hooo
Now I can get back to the workbench.

Thanks a lot for your help SJennings.
Now where is that vcr.
Stanley http://www.mandolincafe.net/iB_html/non-cgi/emoticons/mandosmiley.gif

Rob Powell
Sep-28-2004, 12:52pm
Looking good Stanley...but I think you put the neck in the wrong place http://www.mandolincafe.net/iB_html/non-cgi/emoticons/rock.gif

Sep-28-2004, 5:20pm
.........and the scroll looks kinda funny.


Sep-28-2004, 5:54pm
Hey! There it is! (I wasn't going to mention the "unusual" placement of the neck.) http://www.mandolincafe.net/iB_html/non-cgi/emoticons/biggrin.gif

Now, step away from the VCR, and get back to the workbench! That's where I'm headed right now.

Stanley Cox
Sep-28-2004, 6:53pm
Neck? I thought that was the tailpiece.

Pete, that is a cnc scroll. http://www.mandolincafe.net/iB_html/non-cgi/emoticons/biggrin.gif