Need parts for s.s. stewart mandolin banjo

[Hal Jeanes]

I am working on a S.S. Stewart Mandolin Banjo and need four "L" Bracket Shoes and a tuner ring gear and its screw. #The "L" Bracket shoes available from Stewart Mcdonald and others are too large. #It will not be difficult to replace the tuners, but I really need these four "L" Bracket shoes. #Any ideas?

[Paul Hostetter]

I think you're going to have to be a lot more specific, including photos, about what you need for the shoe and particularly the missing tuner parts.

[Hal Jeanes]

I have taken pictures that I hope will better explain what I need. As far as the shoe goes, I need four shoes, washers, and screws for attachment to the rim.

[Hal Jeanes]

Here is the photo of the shoes at different angles.

[allenhopkins]

Don't know where you're located, but I've been dealing with Stutzman's Guitar Center here in Rochester for 40+ years, and they have drawers full of old banjo parts taken off instruments that they've repaired, or purchased for their parts.

Here's there website, including e-mail links:

Stutzman's Home Page (http://www.stutzmansguitarcenter.com/)

They might be worth contacting.