- Water based dye question
- Lost a Tuner Key Screw for my Gibson F-9
- Building a mandocello...
- Is this totally whacko (using a laser) or is it brilliant*?
- Fixing a split/crack on old flat back
- Lacquer over wipe on varnish?
- D strings vibrating sympathetically
- Wood block size for carving a mandola back?
- repair inquiry...
- Vinyl sealer?
- Magnetic Capo?
- Tuner holes / bushing hole question
- Just completed my first lacquer repair-observations
- Mandolin Set Ups in the Los Angeles Area
- Replacing a nut
- Glow in the Dark electric mandolin
- x-braced mandolin with depressions under the bridge feet
- Sustainable Ebony
- A recent observation from another sound searcher.
- Longer Scale Axes: Flat Top vs. Induced Arch vs. Carved Arch
- Gibson H-1 mandola project
- Lacquer repair update and questions
- Tools to Shave the Finish Off My Neck
- Tuner question
- German roundbacks- machine head tuners
- Replace neck on Godin A8
- Repairing small round dings on a LM-600 mandolin
- James (Andy) Parker Mandolin Builder
- oval hole bracing
- A lucky fix
- Fitting the bridge on a arch top mandolin.
- Is it set up right?
- Octave Mandolin Project from Eastman Mandolins
- Ozark Mandolin back glue?
- Hacklinger
- Negative Impacts of caving/sinking/collapsing top
- Canadian white and eastern spruces
- Golden Age Tuners
- Whither the Makers from the Czech Republic ???
- Review of Minwax Brushing Lacquer
- Removing Binding and perfling
- Mandolin bridges
- Shout Out For Waldron Music
- Bridge Mass
- Fretboard care question
- Mildew
- Y.a.f.q.
- deflection jigs
- Dobro Resonator Mandolin Neck adjustment
- titebond or hot hide glue
- Unsung Heroes
- How do I get a pro finish without building a spray booth?
- Nut Replacement
- Anyone tried a Mothers Powerball?
- bracing carved back mandolin
- New Shop
- A new baby of the mandolin family?
- 50's era Gibson guitar headstock decal
- Building a "Mandolino" A. Stradivari, Cremona 1680
- lacquer problem
- Tuning problem
- Starting a Solid Body Tenor Build.
- New Custom Flat Top
- Question about building order (octave mando)
- clamp on mic/ Collings MT-O
- F5-G Refinishing
- Neck/Fretboard Repair
- Tailpiece help?
- How can you fix a botched finish?
- Ovalhole comparison video
- emeregency stuff for travel
- Jiri Lebeda - Still building.
- How to set up a mandolin
- To tone bar or not?
- Video about John Gathright and his son Jake
- String Post Space
- Sinking top Strad-o-lin
- Wappen body shape
- old bowlback tuners needed
- What does this mean?
- help finding luthier
- Filler too dark
- Good mandolin setup in Atlanta or Charleston, SC?
- Wrench to fit truss rod pocket on OM and zouk?
- Cutting a binding channel
- An embarrassment of riches ... and a four string mando?
- Laminate Top Repair - Titebond or Gorilla Glue?
- Fiddle repair (small mando content)
- Vintage Gibson mando bass
- Clear Nail Polish-lacquer?
- individual strings
- Builder Joseph Yanuziello seriously injured
- Mike Marshall's Loar
- Repairing fine crack between binding and wood on a scroll
- How to fix clouding from alcohol damage to nitro finish?
- Looking for threads on cleaning corroded metal parts/tailpieces
- Link found on a friend's FB page
- Split Top?
- Diagnosis a problem (fret issue?)
- Domestic builder interested in making mandolins for private label
- Happines is a new workbench (cheap)
- Converting Archtop Guitar to OM
- Strumming a Piece of History
- Questions for those who have built a saga AM-10
- Crack in Mandolin soundboard
- Broken Brace in my Godin
- First ever...
- Sanding a little too enthusiastic...
- Yet another mando--does this look familiar to anyone?
- How would you fix a headstock problem like this?
- Removing the "cloud" tailpiece cover on '34 Gibson A-OO
- Woodworking Chisels
- oiling tuner gears
- Buffing out a finish
- Re-do mandolin fretboard, or continue on?
- Belt sander question
- Re-bracing my mandolin soundboard
- New carbon fiber neck rod
- Tenor Guitar Build?
- neck block size
- Scarf joint
- Lacquer repair
- Carbon fibre neck reinforcement question
- Want to blacken or remove pick guard binding...
- First Build- 2 Point Mandola
- fingerboard crack - guitar
- Stromberg Master 400 plans?
- Building a mando/ kit from Stew Mac
- Magic Probe Thickness Gauge - Input Needed
- Scale length and working out fret spacing
- Any sources of pre-graduated tops and backs?
- Reduce moisture absorption ?
- Alternate Sound Board Carving Methods for the Mandolin
- Neck not aligned with body
- First Post and a Few Questions.
- The Loar 520 set-up help
- Difference between F4 and F5 other then looks
- build or buy?
- Hand cramps?
- Flatiron-Gibson Warranty work?
- Pic of simple fixture for 1 handed spraying?
- what ever happend to the Ted Davis wood?
- Narrowing a mandocello neck
- Just ordered the F5 kit from IV-a few questions
- Will the Siminoff pattern used for a mold fit the IV F5 kit?
- This Thickness Gauge might be helpful
- scalloping the fingerboard extension
- Most Complete Mandolin You Ever Abandonded
- Joe Foley Bouzouki
- Kentucky KM 600 Cracked neck
- Tap tuning using a guitar tuner?
- Distressing wood finish
- How I spent my summer vacation...
- Eastman Bacon Design
- mandola graduations
- Would you refinish this mandolinetto or leave it as-is?
- Keeping your binding clean
- Tone Bar Fitting Jig - it's kind of insane.
- HHG question
- Mandolin Headstock overlays
- French Polish Final Coats
- Red
- the demise of the pick guard
- Guitar repair question - WARNING: No mando content!
- Mystery pitch loss!
- IV Kit arrived today Is this normal?
- Well .... it's time ...
- Savannah mandolin recomendations for new bridge and strings
- Kentucky A style mandolin questions
- Spray or hand rub, Dye questions
- PTFE and Nuts?
- South Korean Luthiers
- How to best fit an Ebony Overlay for an IV F4 kit
- I Want To Lower Bridge
- Wood for fingerboard extension piece
- What to do with this 1917 A-4 Gibson…?
- Nada mandolin; lotta' resonator
- gibson pickguard clamp purchased to use as pattern
- Refret advice needed: Stew Mac 147 the same size as Dunlop 147?
- Are nitrocellulose Lacquers basically the same?
- Finished My Stew Mac Kit Build!
- Strings touch the top behind the bridge
- Holst F4 custom build
- Using Photyoshop to Mock-up inlay paterns
- Bohm Waldzither Tuners
- woodworking clamps
- Binding routing jig
- Top bound only
- Eastman 815 binding repair advice needed.
- Sanding the neck
- Planer Blades
- Supersoft 2 and curly maple binding
- Binding the peghead. How hard is it to use wood binding?
- A Ukulele into a mandolin
- Scale length off after repair
- Help identifying this model of Banjo-Mandolin
- How to identify lacquer vs. varnish finish?
- Repair a Crackled Finished
- Mike at Shawnee Creek
- Laminate Trimmer vrs. Dremel for cutting binding channels
- Order of cutting for Routing two channels of the peghead on a F4
- white maple uses
- u-beat hard shellac
- Shipping boxes
- Cheap mini plane?
- Army & Navy AM-100 Bridge position and best strings
- Back button/heel cap
- 19" Mandola string advice
- Collings tuners
- Hi total newb here...
- Teens Gibson oval hole graduations via Magic Probe
- So, that other thread leads to a question about strobing.
- New top or new mandolin?
- Re: Tone bars. What if...?
- two layers of plastic binding on the peghead-glue first?
- Speedy Speed Neck
- Projects at large: Let's GO!
- Upgrade on Tailpiece for IV A Kit
- How hard is it to put a new neck on a mandolin
- Adjusting a Collings Bridge ?
- Advice on repairing my bowlback
- Good source for plywood?
- Travolin "The Mandolin for Travolen"
- Octave mandolin (or mandola, or mandocello) from guitar
- Guitar mandocello conversion strings and tailpiece
- Mando Mildew
- Mandolin setup by Rob Meldrum
- Nut Problem on my Weber
- Harmony Mandolin?
- Should I replace my cracked bridge?
- Bridge thumbwheels.
- Cracked Neck
- Fret Board Leveling
- Intonation and bridge
- Waverly tuners 10X better?
- Sound Hole Placement
- Issues with my mando
- One Piece vs Adjustable Mandolin Bridge
- A9 neck issue
- Pink Ivory for nut or saddle?
- NEED EARLY 90s BOZEMAN ERA TAILPIECE !!! HELP
- Gibson pickguard repair question
- Fungus-Treated Wood
- replacing battery for an Ovation MCS-148: question
- Ivoroid buttons for a 1970's Gibson F-12
- need a refret job
- Does Gibson binding crumble?
- Clamping mandolin whilst glueing on soundboard
- Finish for a Kit
- Replacing Mandolin Nut