Re: Ideas to get a replacement pick guard for Pava #14
Hi Nick - If Pava used a drill jig to drill the holes, & the spacing is un-changed,then a pick-guard with a pre-drilled bracket should fit.
If the spacing has changed,then a guard with an un-drilled bracket is what you need along with a bit of careful marking out & drilling of the bracket. A strip of masking tape placed over the hole positions & a wax crayon will give you a 'rubbing' of the hole positions which you can transfer to the bracket,
Ivan
Weber F-5 'Fern'.
Lebeda F-5 "Special".
Stelling Bellflower BANJO
Tokai - 'Tele-alike'.
Ellis DeLuxe "A" style.
Bookmarks