Search:

fullers vintage guitar is just about all youve got in Houston for higher end mandos on display, you can get morgan monroe's at music go round, and guitar center says they take orders for weber, and...

I had the same problem with the bowing fretboard. I did as Don McRostie shows in his video. After the fretboard is fretted, place a shim under each end of the fretboard, and clamp it down in the...

to answer the original question of "what is the difference between poly and nano". I believe that the poly are coated after winding and the nano is coated, then wound.
I happen to agree with...

sounds nuts i know, but i use the mic that came with the computer. I just stick it inside the mandolin through the large opening at the rear of the bottom f-hole, and let it just sit inside. Only...

Guitar Tracks Pro is the software that i use. About $100 at guitar center. It has pretty much everything you need to do some pretty impressive recording with a really cheesy recording set-up. I only...

This is a interesting thread. I noticed (with the mandolins that I have played, and the one that i have built,) that the thicker the headstock, the more sustain I tend to have.
With that said,...

thanx for the link cowboy, think i will try to check this BABA, sounds great, I never knew it exsisted

im in

for that matter if any of you beginners out here in the houston area, would like to jam some time just e-mail me. I have played guitar for about 4 years and mando for less than that. I dont really...

there is a nice little jam/concert happening this coming weekend. search for spring creek bluegrass and you should find it.
I am also a beginner on the mandolin. If you want to get together and jam...

I also have a Michael Kelly Firefly. I had the same problem and could not figure out where the rattle was coming from. I went over the instrument checking the tightness of all the screws and found...

I did get the smaller airbrush from stew-mac, and I like it a lot. It came in very handy on #1. I did, however, come to regret my decision to but a cheap gun from wally world to spray my clear. I...

very sweet Yonkle, love that color.

very nice Gary, cant wait to see the scroll results. The stuff I am using obviously cant compete with this. It sure beats the point cloud we discussed before.

if you go to Countrytabs.com someone has posted a tabbed out intro that is very close and can get you going on it.


*I have no affiliation with the website mentioned above

back

closer

better late than never

I cant imagine it would hurt the tone too much. Do you plan to mix the color with lacquer for spraying?
I would reccomend however that you start with the A style kit for your first build, it will...

she's in the lacquering stage now, Ive got the color to it and am doing the clear now. I think that this finishing step may be the toughest one yet. It seems like the further I get into finishing it...

for that matter you could simply try plugging your amp to a few different outlets in your house. I had a similar problem with an 8 track recorder, plugged it to the outlet across the room, and...

awesome Yonkle, working on the lacquer on mine now, what a pain.

I strung up my first today, about an hour ago. The top didnt cave in and only had a slight buzz untill I realized I had left the truss rod loose. I am just so happy I cant put it into words. I want...

I would really like to see your results if you dont mind posting them when youre done.

I dont think it would be to terribly difficult. You could achieve fairly good "rough out" results using helical interpolation, with say a 3/8 or .5 end or ball mill. You would wind up with something...