Try 40 60 90 135 for cgda or fcgd with 25 40 60 90
I have that on a 34 scale
It would work on a shorter scale but will have less tension
Hofner strings are 35-90 i think
Type: Posts; User: Rvl
Try 40 60 90 135 for cgda or fcgd with 25 40 60 90
I have that on a 34 scale
It would work on a shorter scale but will have less tension
Hofner strings are 35-90 i think
You can also change to C G DD AA EE
I have 2 Hathway , a mandocello , a bouzouki , and a Suzuki mandocello
http://www.paulhathway.com/mandocello-2/
27 inch is a good choice
My Suzuki mandocello is 22 inch and C strings are around .090
My Hathway mandocello is 26 inch and has better tension but I have it strung up FCGD now
I have the MC-3
http://www.b-band.com/index.php?mact=Products,cntnt01,details,0&cntnt01hierarchyid=2&cntnt01productid=3&cntnt01returnid=151
It looks as if the the mic can be only used with A2 preamp only as a 2nd...
I find the Dtar better than the Highlander , the Dtar is a Rick Turner design also
There are so many variables when amplifying acoustic instruments
It will work but feedback , phasing , brightness , hollow sounding or other problems can be reduced with the use of a good external...
Thanks for the heads up , ordered mine today
I have a Hathway mc strung up as bouzouki and I want to make it into CGDDAAEE or CGDdAaEe
So I wont have to change the tuners but I just have to calculate the nut spacing
I think that would be a...
I have 2 with Headway and 3 with K&K , I prefer the Headway into a AER amp or into the board
Dtar are also a good piezo
I have heard about the RedEye di but havent tried it , yet
I sometimes use...
I have tried many times to make guitars into CGDA or CGDAE , not simple
easiest is to use a guitar with an archtop bridge
-replace nut
-replace tailpiece
-replace bridge
-fill in tuner holes...
Does anyone know the string lengths?
I have 26.5" CGDAE and CGDA and 25.5" FCGDA
Any brand of compound is ok
The ones I buy comes in 3 levels of grit
Offhand they are 7 microns , maybe 1 micron and .03 microns
I start with the 7 and then the 1 and finally .03
They come in...
I lay a piece of tissue paper , then drip some water onto the tissue and let it soak for about an hour
The sticker usually slides off
Usually the finish is a little discolored because of...
Thank you
A couple more questions
Do you use any instruments with piezo's?
I have both
It states Ch 2 is specifically designed for electric
So I guess Ch 1 is for piezo's
Is the Di out , post or pre eq?...
I am considering getting a Micro Pro 8
If you had to buy another one would you still get the 8" or a 10"
I noticed that a Jazz guitar player got the 8 and then later switched to the 10
I have an...
How about a blade type?
spacing(edge to edge)
-9mm
-11mm
-9mm
-11mm
-9mm
Soundholes
-72mm
-78mm
-58mm
-65mm
-66mm
I'll try to get a video up
the top had a crack and the previous owner used glitter to hide it
This is my cello guitar
I have 5 tenor guitars
but I wanted a lower tuning
this one is CGDAE .072-.013
an octave below tenor tuning
made a new bridge today and trying out a Lace pickup
...
Yes the tailpiece
Sorry my mistake
What is the thickness of the aluminium?
And what size machine screws did you use?
Do you have any diagrams or plans for your bridge?
I am looking for making 4 and 5 string and 10 strings bridges like that