Mandola case

[catmandu2]

I need a case for my TC -- I'd like a hardshell case, but I haven't had any luck finding one.

What are folks using and where did you get them? Thanks

[Soupy1957]

Hardshell for all my mandos...I prefer the ones that are externally shaped like the instrument..not much into "boxy" looking cases, but that is purely subjective.

Cain't understand "Gig bags".....lol
-soupy1957

[BBarton]

I have a used, black, arch-top (typical TKL type) hardshell mandola case in good shape that I am planning to sell. This is a standard A-style case designed to suit old Gibsons or mandolas built on similar specs, so I'm not sure how would fit a TC. I haven't put on the classified yet, but may do so soon. Get in touch if you wish.

Have you tried Elderly or First Quality Music?

[allenhopkins]

Saga sells a hardshell case for their TC mandola. I went to their website but there was no information regarding purchase of this case other than buying the instrument.

You might want to contact Saga at this link (http://www.sagamusic.com/contact_us.asp) and see if they can direct you to a source for their cases. They don't sell direct, only through dealers, but they might be able to give you a lead.

[catmandu2]

Bruce,

I sent you a PM, but I may not have an active email address here...don't know.

My TC dimensions are:

Total length = 28 1/2"
Body width = 11 1/2" by length ~15"
depth = 2 1/2"

Thanks

[BBarton]

I will measure case and let you know, either here or if I get message. Chacking out Saga as suggested might be a good option for you too.

[catmandu2]

Great--thanks.

Thanks for the link Allen--I've submitted my request.

[BBarton]

Inside dimensions of my case are: 28 1/2" long, 12 1/4" wide at wide spot, and 3" deep (not including top). It's teardrop shaped and the body portion is about 15 1/2" long. If interested, I'll try and get pics and contact through member forum. The best option, of course, would be to get the case TC uses to guarantee fit -- I expect it could be ordered through TC dealer.

[catmandu2]

Sounds like a near-perfect fit. I wouldn't need photos--just a description of any issues: non-functioning latches/hinges and separation/delamination, and price.

Thanks. All things being equal, I prefer to buy used whenever I can!

[BBarton]

No issues whatsoever. I sent message directly via members board.

[catmandu2]

Do you think my TC will fit at 28-1/2"?

[BBarton]

It would probably just fit, but snugly - I measured length of 28 1/2" from the pile at each end. My mandola, a custom arch-top, had standard Gibson H-size body but the headstock was a little longer - overall it is about 29". It fit, but in order for end pin to fit too, about a 1/2" of the pile lining had been peeled over at that spot so the end pin was actually against the inside of the case - not very desirable if the case was ever dropped on its end!! (hence, I have custom-made Calton case for it now). Fortunately, the lining was not cut or damaged and I simply reglued back in place. Case is fine, one slight nick from the vinyl on the top - that's about it. Latches, hinges, etc. are all fine and lock still has the keys. Did you get my email message?

[catmandu2]

I did get your email, but I don't know if you received my reply.

It sounds like it will work, being that my dola is about a half-inch shorter than yours. I'm agreeable on the price.

[BBarton]

No, I didn't get reply yet, but will look for. If it doesn't show up, I'll send another message including my email.